[U-Boot] dfu: some wrong usb_qualifier_descriptor settings?

[Heiko Schocher <hs@denx.de>]

Hello Lukasz,

In the dfu spez [1] chapter 4.2.1 the following fields are specified:

bDeviceClass = 00h (Description: ?see interface?), currently set in
U-Boot to 2.

bDeviceSubClass = 00h (Description: ?see interface?), currently set in
U-Boot to 2.

bcdUSB = xxxxh (Description: USB specification release number in binary coded decimal -> 0110h)
Currently set to 0x200

If I look in ./drivers/usb/gadget/f_dfu.c:

static const struct usb_qualifier_descriptor dev_qualifier = {
         .bLength =              sizeof dev_qualifier,
         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
         .bcdUSB =               __constant_cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_VENDOR_SPEC,
         .bNumConfigurations =   1,
};

bDeviceClass = USB_CLASS_VENDOR_SPEC = 0xff ?

   Hmm... why states the doc this should be set to 0 = USB_CLASS_PER_INTERFACE?
   2 is USB_CLASS_COMM ... which seems more appropriate ...

bDeviceSubClass is not defined ...
bcdUSB = 0x0200 which should be 0x0110 ... oh, as [1] is the dfu 1.1
specification it should be 0x0110 but the spec [1] says 0100 ... is the
spec here buggy? is there a dfu 2.0 specification availiable?

Has this differences to the spec some reason? Or can we change them
to the values specified in the spec?

Thanks!

bye,
Heiko

[1]: http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany