From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ivan Khoronzhuk Date: Tue, 26 Aug 2014 00:21:05 +0300 Subject: [U-Boot] [U-Boot, U-boot, v3, 1/3] mtd: nand: davinci: allow to change ecclayout by ecclayout command In-Reply-To: <20140825191444.GP19374@bill-the-cat> References: <1403617746-25024-2-git-send-email-ivan.khoronzhuk@ti.com> <20140825191444.GP19374@bill-the-cat> Message-ID: <53FBA8C1.3030204@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/25/2014 10:14 PM, Tom Rini wrote: > On Tue, Jun 24, 2014 at 04:49:04PM +0300, Khoronzhuk, Ivan wrote: > >> From: WingMan Kwok >> >> This patch adds opportunity to change ecclayout of current nand >> device during runtime. So we can change the current nand device >> ecclayout using the "nand ecclayout set" command before writing >> the data to nand flash. >> >> Signed-off-by: Hao Zhang >> Signed-off-by: WingMan Kwok >> Signed-off-by: Ivan Khoronzhuk > Applied to u-boot-ti/master, thanks! > Sorry Tom, but the subj patch as entire "[U-boot] [Patch v3 0/3] keystone: nand: add additional nand ecclayout" series was completely replaced by "[U-boot] [Patch 0/3] Add support for NAND U-boot image upgrade" series (http://lists.denx.de/pipermail/u-boot/2014-July/182956.html) which has been applied already. Hence, this patch as all patches from this series would be better to remove... Once again sorry. I should specify here about this. -- Regards, Ivan Khoronzhuk