From: Li Ye-B37916 <b37916@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board
Date: Fri, 5 Sep 2014 20:15:22 +0800 [thread overview]
Message-ID: <5409A95A.6040202@freescale.com> (raw)
In-Reply-To: <CAP9ODKoL32Gw5PNacFDUCLOVrNLrF_dm6HZJbvOx=9sQOG1GAg@mail.gmail.com>
On 9/5/2014 2:43 AM, Otavio Salvador wrote:
> Hello Ye,
>
> On Thu, Sep 4, 2014 at 11:17 AM, Ye.Li <B37916@freescale.com> wrote:
>> This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
>> shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
>> pin-pin compatible with i.MX6Q.
>>
>> The patch also support the DDR 32-BIT mode option. Please define
>> CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
>> mode.But due to the board design, it's 64bit DDR buswidth physically,
>> so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
>>
>> Signed-off-by: Ye.Li <B37916@freescale.com>
> Your patch short log could be improved for:
>
> imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
>
> This could be reworked on the other patches as well.
>
> My 2c.
>
Thanks for your comments. I will rework the short logs in v3.
Best regards,
Ye Li
next prev parent reply other threads:[~2014-09-05 12:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-04 18:43 [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board Otavio Salvador
2014-09-05 12:15 ` Li Ye-B37916 [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-09-04 14:17 [U-Boot] [PATCH v2 1/5] iMX6Q:arm2: Add the kernel FDT Loading support Ye.Li
2014-09-04 14:17 ` [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board Ye.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5409A95A.6040202@freescale.com \
--to=b37916@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox