[U-Boot] [PATCH 7/8] samsung: Move s5p_goni to use exynos-common config

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello Simon,

On 07/23/2014 02:11 PM, Simon Glass wrote:
> Change this board to use the exynos common config and add a device tree.
>
> This also adds a pinmux header file - but it is just a copy of the exynos
> one so may be incorrect.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
>   arch/arm/dts/Makefile                      |  1 +
>   arch/arm/dts/s5pc1xx-goni.dts              | 21 ++++++++++
>   arch/arm/include/asm/arch-s5pc1xx/periph.h | 61 ++++++++++++++++++++++++++++++
>   arch/arm/include/asm/arch-s5pc1xx/pinmux.h | 50 ++++++++++++++++++++++++
>   drivers/mmc/s5p_sdhci.c                    |  2 -
>   include/configs/s5p_goni.h                 | 55 +++++----------------------
>   6 files changed, 143 insertions(+), 47 deletions(-)
>   create mode 100644 arch/arm/dts/s5pc1xx-goni.dts
>   create mode 100644 arch/arm/include/asm/arch-s5pc1xx/periph.h
>   create mode 100644 arch/arm/include/asm/arch-s5pc1xx/pinmux.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 3b760ff..6a6e664 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
>   dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
>   	exynos4210-smdkv310.dtb \
>   	exynos4210-universal_c210.dtb \
> diff --git a/arch/arm/dts/s5pc1xx-goni.dts b/arch/arm/dts/s5pc1xx-goni.dts
> new file mode 100644
> index 0000000..c390c8f
> --- /dev/null
> +++ b/arch/arm/dts/s5pc1xx-goni.dts
> @@ -0,0 +1,21 @@
> +/*
> + * Samsung's Exynos4210-based SMDKV310 board device tree source
> + *
> + * Copyright (c) 2014 Google, Inc
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +/dts-v1/;

This is a mistake. Exynos4 is different than s5pc1xx(which was later 
called exynos3 and is also called s5pv210(kernel)).
So the s5pc1xx-goni.dts should include:
   model = "Samsung Goni based on S5PC110";
   compatible = "samsung,goni", "samsung,s5pc110";

And the base addresses are different than exynos4. Please look at:
arch/arm/include/asm/arch-s5pc1xx/cpu.h

This will require also a common file for s5pc1xx: s5pc1xx-common.dts.
Moreover, the S5PC100 and S5PC110 have lot of differences.

Simon, I think that this is a job for goni's maintainer, since you can't 
test it on a hardware.

Robert, can you look at this?

> +/include/ "exynos4.dtsi"
> +
> +/ {
> +	model = "Samsung SMDKV310 on Exynos4210";
> +	compatible = "samsung,smdkv310", "samsung,exynos4210";
> +
> +	aliases {
> +		serial0 = "/serial at 13800000";
> +		console = "/serial at 13820000";
> +	};
> +
> +};


Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com