From: Bin Liu <b-liu@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only
Date: Tue, 9 Sep 2014 09:09:34 -0500 [thread overview]
Message-ID: <540F0A1E.7060109@ti.com> (raw)
In-Reply-To: <1410266224-4051-2-git-send-email-hs@denx.de>
Heiko,
On 09/09/2014 07:37 AM, Heiko Schocher wrote:
> add the new config option CONFIG_DFU_FULLSPEED. With this
> option enabled, DFU uses fullspeed only.
Can we not introduce the new config option but check the gadget driver
speed in runtime as what the ether gadget driver does?
I don't want two config options (CONFIG_USB_GADGET_DUALSPEED and
CONFIG_DFU_FULLSPEED) to control one feature, as in your patch 2/2.
Regards,
-Bin.
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Cc: Tom Rini <trini@ti.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Liu Bin <b-liu@ti.com>
> Cc: Lukas Stockmann <lukas.stockmann@siemens.com>
> ---
> README | 3 +++
> drivers/usb/gadget/f_dfu.c | 3 +++
> drivers/usb/gadget/g_dnl.c | 3 +++
> 3 files changed, 9 insertions(+)
>
> diff --git a/README b/README
> index 0a0f528..1413392 100644
> --- a/README
> +++ b/README
> @@ -1607,6 +1607,9 @@ The following options need to be configured:
> entering dfuMANIFEST state. Host waits this timeout, before
> sending again an USB request to the device.
>
> + CONFIG_DFU_FULLSPEED
> + use for the dfu functionality fullspeed only.
> +
> - USB Device Android Fastboot support:
> CONFIG_CMD_FASTBOOT
> This enables the command "fastboot" which enables the Android
> diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
> index 1145aab..dfa9f3b 100644
> --- a/drivers/usb/gadget/f_dfu.c
> +++ b/drivers/usb/gadget/f_dfu.c
> @@ -238,6 +238,7 @@ static inline void to_dfu_mode(struct f_dfu *f_dfu)
> {
> f_dfu->usb_function.strings = dfu_strings;
> f_dfu->usb_function.hs_descriptors = f_dfu->function;
> + f_dfu->usb_function.descriptors = f_dfu->function;
> f_dfu->dfu_state = DFU_STATE_dfuIDLE;
> }
>
> @@ -245,6 +246,7 @@ static inline void to_runtime_mode(struct f_dfu *f_dfu)
> {
> f_dfu->usb_function.strings = NULL;
> f_dfu->usb_function.hs_descriptors = dfu_runtime_descs;
> + f_dfu->usb_function.descriptors = dfu_runtime_descs;
> }
>
> static int handle_upload(struct usb_request *req, u16 len)
> @@ -809,6 +811,7 @@ static int dfu_bind_config(struct usb_configuration *c)
> return -ENOMEM;
> f_dfu->usb_function.name = "dfu";
> f_dfu->usb_function.hs_descriptors = dfu_runtime_descs;
> + f_dfu->usb_function.descriptors = dfu_runtime_descs;
> f_dfu->usb_function.bind = dfu_bind;
> f_dfu->usb_function.unbind = dfu_unbind;
> f_dfu->usb_function.set_alt = dfu_set_alt;
> diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
> index 58cad11..79e0c9c 100644
> --- a/drivers/usb/gadget/g_dnl.c
> +++ b/drivers/usb/gadget/g_dnl.c
> @@ -143,6 +143,9 @@ static int g_dnl_config_register(struct usb_composite_dev *cdev)
> config->bConfigurationValue = CONFIGURATION_NUMBER;
> config->iConfiguration = STRING_USBDOWN;
> config->bind = g_dnl_do_config;
> +#if defined(CONFIG_DFU_FULLSPEED)
> + config->fullspeed = 1;
> +#endif
>
> return usb_add_config(cdev, config);
> }
>
next prev parent reply other threads:[~2014-09-09 14:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-09 12:37 [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only Heiko Schocher
2014-09-09 12:37 ` [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only Heiko Schocher
2014-09-09 14:09 ` Bin Liu [this message]
2014-09-09 14:25 ` Lukasz Majewski
2014-09-09 14:37 ` Heiko Schocher
2014-09-09 14:42 ` Bin Liu
2014-09-10 6:10 ` Heiko Schocher
2014-09-09 12:37 ` [U-Boot] [PATCH v1 2/2] arm: am335x: siemens board use in DFU " Heiko Schocher
2014-09-09 13:43 ` [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only Lukasz Majewski
2014-09-09 14:05 ` Bin Liu
2014-09-09 14:24 ` Lukasz Majewski
2014-09-09 14:22 ` Heiko Schocher
2014-09-10 5:46 ` Stockmann, Lukas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=540F0A1E.7060109@ti.com \
--to=b-liu@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox