From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Sun, 14 Sep 2014 11:53:34 -0700
Subject: [U-Boot] [PATCH] imx: nitrogen6x: Make use of both uSD and SD
 slots to load script or kernel on Sabrelite board
In-Reply-To: <1410429592-10456-1-git-send-email-guillaume.gardet@free.fr>
References: <1410429592-10456-1-git-send-email-guillaume.gardet@free.fr>
Message-ID: <5415E42E.6070108@boundarydevices.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Guillaume,

On 09/11/2014 02:59 AM, Guillaume GARDET wrote:
> Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot.
> This patch makes use of both slots instead of only one.
> 
> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Eric Nelson <eric.nelson@boundarydevices.com>
> 
> ---
>  include/configs/nitrogen6x.h | 25 ++++++++++++++-----------
>  1 file changed, 14 insertions(+), 11 deletions(-)
> 
> diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
> index d4b0ac9..2a1eb3b 100644
> --- a/include/configs/nitrogen6x.h
> +++ b/include/configs/nitrogen6x.h
> @@ -186,7 +186,7 @@
>  	"fdt_addr=0x18000000\0" \
>  	"boot_fdt=try\0" \
>  	"ip_dyn=yes\0" \
> -	"mmcdev=0\0" \
> +	"mmcdevs=0 1\0" \
>  	"mmcpart=1\0" \
>  	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
>  	"mmcargs=setenv bootargs console=${console},${baudrate} " \
> @@ -238,16 +238,19 @@
>  		"fi;\0"
>  
>  #define CONFIG_BOOTCOMMAND \
> -	   "mmc dev ${mmcdev}; if mmc rescan; then " \
> -		   "if run loadbootscript; then " \
> -			   "run bootscript; " \
> -		   "else " \
> -			   "if run loaduimage; then " \
> -				   "run mmcboot; " \
> -			   "else run netboot; " \
> -			   "fi; " \
> -		   "fi; " \
> -	   "else run netboot; fi"

If you add one more loop here, you can get SATA support
and end up with something very close to the Nitrogen6x
configuration!

> +	"for mmcdev in ${mmcdevs}; do " \
> +		"mmc dev ${mmcdev}; " \
> +		"if mmc rescan; then " \
> +			"if run loadbootscript; then " \
> +				"run bootscript; " \
> +			"else " \
> +				"if run loaduimage; then " \
> +					"run mmcboot; " \
> +				"fi; " \
> +			"fi; " \
> +		"fi; " \
> +	"done; " \
> +	"run netboot; "
>  #else
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	"console=ttymxc1\0" \
> 

Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>