From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Thu, 25 Sep 2014 09:31:29 -0700 Subject: [U-Boot] [PATCH v4] powerpc/t104xrdb: Add T1042RDB board support In-Reply-To: <1408432613-21839-1-git-send-email-vijay.rai@freescale.com> References: <1408432613-21839-1-git-send-email-vijay.rai@freescale.com> Message-ID: <54244361.2080202@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/19/2014 12:16 AM, Vijay Rai wrote: > T1042RDB is a Freescale reference board that hosts the T1042 SoC > (and variants). The board is similar to T1040RDB, T1042 is a reduced > personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). > > T1042RDB is configured with serdes protocol 0x86 which can support > following interfaces > - 2 RGMII's on DTSEC4, DTSEC5 > - 1 SGMII on DTSEC3 > DTSEC1, DTSEC2 are not connected on board. > > This Patch > - add T1042RDB support > - updates README file for T1042RDB details and update commands for switching > to alternate banks from vBank0 to vBank4 and vice versa > > This patch also does minor clean ups for fdt defines for T1042RDB and > T1042RDB_PI board > > Signed-off-by: Vijay Rai > Signed-off-by: Priyanka Jain > --- > changes for v4: There are some changes regarding Kconfig, > Added configs/T1042RDB_defconfig file to support T1042RDB,added T1042RDB as > config option into board/freescale/t104xrdb/MAINTAINERS > Applied to u-boot-mpc85xx, awaiting upstream. York