From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig
Date: Sun, 28 Sep 2014 17:40:51 +0200 [thread overview]
Message-ID: <54282C03.70306@redhat.com> (raw)
In-Reply-To: <1411918437.17796.2.camel@hellion.org.uk>
Hi Ian,
On 09/28/2014 05:33 PM, Ian Campbell wrote:
> On Thu, 2014-09-25 at 20:09 +0100, Ian Campbell wrote:
>> On Wed, 2014-09-24 at 16:01 +0800, Chen-Yu Tsai wrote:
>>> The Colombus board is an A31 evaluation board from WITS Technology.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>
>>> ---
>>> configs/Colombus_defconfig | 4 ++++
>>> 1 file changed, 4 insertions(+)
>>> create mode 100644 configs/Colombus_defconfig
>>>
>>> diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
>>> new file mode 100644
>>> index 0000000..16800de
>>> --- /dev/null
>>> +++ b/configs/Colombus_defconfig
>>> @@ -0,0 +1,4 @@
>>> +CONFIG_SYS_EXTRA_OPTIONS="COLOMBUS"
>>
>> Does this do anything other than define an unused #define?
>>
>> Ah, I suppose eventually it will cause the inclusion of a suitable dram
>> file. Really ought to start moving things out of SYS_EXTRA though, but I
>> don't think you need to shave that yakk just to get this patch in, so:
>>
>> Acked-by: Ian Campbell <ijc@hellion.org.uk>
>
> Although I've just noticed that lacks a board/sunxi/MAINTAINERS entry.
>
> I think there is no need to resend the whole series, just this one
> patch. With this minor tweak I think it's time add this to
> u-boot-sunxi#next.
Before you do that, note that I've just added 2 patches there, which I would
like to get into v2014.10. Specifically I'm hoping that I can get some
positive testing feedback on the bananapi gmac patch I've send (off-list),
and I believe we really should try to get the bananapi fix into v2014.10,
and if we're going todo a pull-req for v2014.10, we might as well include
the 2 patches I've just added to next. Do you agree ?
Still feel free to merge the sun6i series into next, I can just cherry pick
the 3 patches in question directly into master when I'm ready to send the
pull-req.
Regards,
Hans
next prev parent reply other threads:[~2014-09-28 15:40 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-24 8:01 [U-Boot] [PATCH v2 00/10] ARM: sunxi: Add basic support for Allwinner A31 (sun6i) Chen-Yu Tsai
2014-09-24 8:01 ` [U-Boot] [PATCH v2 01/10] ARM: sunxi: Use macro values for setting UART GPIO pull-ups Chen-Yu Tsai
2014-09-25 18:45 ` Ian Campbell
2014-09-24 8:01 ` [U-Boot] [PATCH v2 02/10] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined Chen-Yu Tsai
2014-09-24 8:01 ` [U-Boot] [PATCH v2 03/10] ARM: sun6i: Add base address for the new controllers in A31 Chen-Yu Tsai
2014-09-24 8:01 ` [U-Boot] [PATCH v2 04/10] ARM: sun6i: Add support for the power reset control module found on the A31 Chen-Yu Tsai
2014-09-25 18:47 ` Ian Campbell
2014-09-24 8:01 ` [U-Boot] [PATCH v2 05/10] ARM: sun6i: Add clock support Chen-Yu Tsai
2014-09-25 18:51 ` Ian Campbell
2014-09-24 8:01 ` [U-Boot] [PATCH v2 06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31 Chen-Yu Tsai
2014-09-25 18:52 ` Ian Campbell
2014-10-31 15:03 ` Pantelis Antoniou
2014-09-24 8:01 ` [U-Boot] [PATCH v2 07/10] ARM: sun6i: Define UART0 pins for A31 Chen-Yu Tsai
2014-09-25 18:54 ` Ian Campbell
2014-09-24 8:01 ` [U-Boot] [PATCH v2 08/10] ARM: sun6i: Setup the A31 UART0 muxing Chen-Yu Tsai
2014-09-25 18:54 ` Ian Campbell
2014-09-24 8:01 ` [U-Boot] [PATCH v2 09/10] ARM: sunxi: Add basic A31 support Chen-Yu Tsai
2014-09-25 18:56 ` Ian Campbell
2014-09-24 8:01 ` [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig Chen-Yu Tsai
2014-09-25 19:09 ` Ian Campbell
2014-09-28 15:33 ` Ian Campbell
2014-09-28 15:37 ` Chen-Yu Tsai
2014-09-28 15:43 ` Ian Campbell
2014-09-28 16:39 ` Maxime Ripard
2014-09-28 15:40 ` Hans de Goede [this message]
2014-09-28 16:20 ` [U-Boot] [linux-sunxi] " Ian Campbell
2014-09-28 17:03 ` Iain Paton
2014-09-28 18:10 ` Hans de Goede
2014-09-28 21:36 ` Ian Campbell
2014-09-29 18:08 ` Hans de Goede
2014-09-30 7:06 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54282C03.70306@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox