From: Guillaume Gardet <guillaume.gardet@free.fr>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL
Date: Mon, 29 Sep 2014 08:39:54 +0200 [thread overview]
Message-ID: <5428FEBA.1010909@free.fr> (raw)
In-Reply-To: <1411116455-20619-1-git-send-email-guillaume.gardet@free.fr>
Hi,
Just a ping on this patch set which affects various part of u-boot.
Any comments ?
Guillaume
Le 19/09/2014 10:47, Guillaume GARDET a ?crit :
> Hi,
>
> This patch set adds EXT filesystem support to SPL and enables it for OMAP4 boards.
> Build is succesful on all omap4 and omap5 boards.
> Note that some OMAP3 boards (omap3_beagle and omap3_overo) may need to disable some functions in order to support EXT in SPL, otherwise the MLO (SPL) may be too big to fit in SRAM.
> I tested it succesfully on a Pandaboard (rev. A3) and on a Beagleboard xM (rev. B).
>
> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Tom Rini <trini@ti.com>
> Cc: Michal Simek <monstr@monstr.eu>
> Cc: Andreas Bie?mann <andreas.devel@googlemail.com>
>
>
> Regards,
>
> Guillaume
>
> ---
>
> Guillaume GARDET (5):
> Rename some defines containing FAT in their name to be filesystem
> generic MMCSD_MODE_FAT => MMCSD_MODE_FS
> CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME
> CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
> CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION =>
> CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
> spl: Add EXT support to SPL
> doc: Update documentation according to the EXT SPL support patch set
> spl: do not hang in spl_register_fat_device but return error value.
> It allows to use both CONFIG_SPL_FAT_SUPPORT and
> CONFIG_SPL_EXT_SUPPORT.
> TI:OMAP4: enable EXT support in SPL for OMAP4 boards
>
> README | 17 ++--
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 4 +-
> arch/arm/cpu/armv7/omap3/board.c | 2 +-
> arch/arm/cpu/armv7/zynq/spl.c | 2 +-
> arch/arm/cpu/at91-common/spl.c | 2 +-
> arch/arm/imx-common/spl.c | 2 +-
> common/spl/Makefile | 1 +
> common/spl/spl_ext.c | 138 +++++++++++++++++++++++++++
> common/spl/spl_fat.c | 8 +-
> common/spl/spl_mmc.c | 24 ++++-
> common/spl/spl_sata.c | 2 +-
> common/spl/spl_usb.c | 2 +-
> doc/README.SPL | 1 +
> fs/Makefile | 1 +
> include/configs/am3517_crane.h | 4 +-
> include/configs/am3517_evm.h | 4 +-
> include/configs/cm_t35.h | 4 +-
> include/configs/devkit8000.h | 8 +-
> include/configs/imx6_spl.h | 4 +-
> include/configs/mcx.h | 4 +-
> include/configs/omap3_evm.h | 4 +-
> include/configs/omap3_evm_quick_mmc.h | 4 +-
> include/configs/sama5d3_xplained.h | 4 +-
> include/configs/sama5d3xek.h | 4 +-
> include/configs/siemens-am33x-common.h | 4 +-
> include/configs/tao3530.h | 4 +-
> include/configs/ti814x_evm.h | 4 +-
> include/configs/ti816x_evm.h | 4 +-
> include/configs/ti_armv7_common.h | 8 +-
> include/configs/ti_omap4_common.h | 3 +
> include/configs/tricorder.h | 4 +-
> include/configs/zynq-common.h | 10 +-
> include/spl.h | 6 +-
> 34 files changed, 232 insertions(+), 67 deletions(-)
> create mode 100644 common/spl/spl_ext.c
>
next prev parent reply other threads:[~2014-09-29 6:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-19 8:47 [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 1/5] Rename some defines containing FAT in their name to be filesystem generic MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 2/5] spl: Add EXT support to SPL Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 3/5] doc: Update documentation according to the EXT SPL support patch set Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards Guillaume GARDET
2014-09-29 6:39 ` Guillaume Gardet [this message]
2014-09-30 13:33 ` [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL Tom Rini
2014-09-30 14:15 ` Guillaume Gardet
2014-10-15 15:53 ` [U-Boot] [PATCH V2 " Guillaume GARDET
2014-10-15 15:53 ` [U-Boot] [PATCH V2 1/5] Rename some defines containing FAT in their name to be filesystem generic Guillaume GARDET
2014-10-27 22:20 ` [U-Boot] [U-Boot, V2, " Tom Rini
2014-10-15 15:53 ` [U-Boot] [PATCH V2 2/5] spl: Add EXT support to SPL Guillaume GARDET
2014-10-27 22:22 ` [U-Boot] [U-Boot,V2,2/5] " Tom Rini
2014-10-29 12:45 ` Guillaume Gardet
2014-10-15 15:53 ` [U-Boot] [PATCH V2 3/5] doc: Update documentation according to the EXT SPL support patch set Guillaume GARDET
2014-10-27 22:21 ` [U-Boot] [U-Boot, V2, " Tom Rini
2014-10-15 15:53 ` [U-Boot] [PATCH V2 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT Guillaume GARDET
2014-10-27 22:21 ` [U-Boot] [U-Boot, V2, " Tom Rini
2014-10-15 15:53 ` [U-Boot] [PATCH V2 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards Guillaume GARDET
2014-10-27 22:21 ` [U-Boot] [U-Boot, V2, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5428FEBA.1010909@free.fr \
--to=guillaume.gardet@free.fr \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox