From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nikita Kiryanov Date: Wed, 01 Oct 2014 14:31:52 +0300 Subject: [U-Boot] [PATCH v3 07/11] imx: Add error checking to setup_i2c() In-Reply-To: <1410966166-20767-8-git-send-email-sjg@chromium.org> References: <1410966166-20767-1-git-send-email-sjg@chromium.org> <1410966166-20767-8-git-send-email-sjg@chromium.org> Message-ID: <542BE628.9060304@compulab.co.il> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Simon, On 17/09/14 18:02, Simon Glass wrote: > Since this function can fail, check its return value. > > Signed-off-by: Simon Glass > --- > > Changes in v3: > - Just warn when one of the board init stages fails > > Changes in v2: > - Add new patch to add error checking to setup_i2c() > > arch/arm/imx-common/i2c-mxv7.c | 24 ++++++++++--- > arch/arm/include/asm/imx-common/mxc_i2c.h | 4 +-- > board/compulab/cm_fx6/cm_fx6.c | 56 ++++++++++++++++++++++++++----- > 3 files changed, 68 insertions(+), 16 deletions(-) > > diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c > index a580873..70cff5c 100644 > --- a/arch/arm/imx-common/i2c-mxv7.c > +++ b/arch/arm/imx-common/i2c-mxv7.c > @@ -69,15 +69,29 @@ static void * const i2c_bases[] = { > }; > > /* i2c_index can be from 0 - 2 */ > -void setup_i2c(unsigned i2c_index, int speed, int slave_addr, > - struct i2c_pads_info *p) > +int setup_i2c(unsigned i2c_index, int speed, int slave_addr, > + struct i2c_pads_info *p) > { > + int ret; > + > if (i2c_index >= ARRAY_SIZE(i2c_bases)) > - return; > + return -EINVAL; > /* Enable i2c clock */ > - enable_i2c_clk(1, i2c_index); > + ret = enable_i2c_clk(1, i2c_index); > + if (ret) > + goto err_clk; > + > /* Make sure bus is idle */ > - force_idle_bus(p); > + ret = force_idle_bus(p); > + if (ret) > + goto err_idle; > + > bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr, > force_idle_bus, p); > + > + return 0; > + > +err_idle: > +err_clk: > + return ret; > } > diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h > index 182c2f3..af86163 100644 > --- a/arch/arm/include/asm/imx-common/mxc_i2c.h > +++ b/arch/arm/include/asm/imx-common/mxc_i2c.h > @@ -52,8 +52,8 @@ struct i2c_pads_info { > &mx6q_##name : &mx6s_##name > #endif > > -void setup_i2c(unsigned i2c_index, int speed, int slave_addr, > - struct i2c_pads_info *p); > +int setup_i2c(unsigned i2c_index, int speed, int slave_addr, > + struct i2c_pads_info *p); > void bus_i2c_init(void *base, int speed, int slave_addr, > int (*idle_bus_fn)(void *p), void *p); > int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf, > diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c > index fdb8ebf..10a568f 100644 > --- a/board/compulab/cm_fx6/cm_fx6.c > +++ b/board/compulab/cm_fx6/cm_fx6.c > @@ -69,7 +69,7 @@ static iomux_v3_cfg_t const sata_pads[] = { > IOMUX_PADS(PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), > }; > > -static void cm_fx6_setup_issd(void) > +static int cm_fx6_setup_issd(void) > { > SETUP_IOMUX_PADS(sata_pads); > /* Make sure this gpio has logical 0 value */ > @@ -79,14 +79,24 @@ static void cm_fx6_setup_issd(void) > cm_fx6_sata_power(0); > mdelay(250); > cm_fx6_sata_power(1); > + > + return 0; > } > > #define CM_FX6_SATA_INIT_RETRIES 10 > int sata_initialize(void) > { > - int err, i; > + int err, i, ret; > > - cm_fx6_setup_issd(); > + /* > + * cm-fx6 may have iSSD not assembled and in this case it has > + * bypasses for a (m)SATA socket on the baseboard. The socketed > + * device is not controlled by those GPIOs. So just print a warning > + * if the setup fails. > + */ > + ret = cm_fx6_setup_issd(); > + if (ret) > + printf("Warning: iSSD setup failed!\n"); > for (i = 0; i < CM_FX6_SATA_INIT_RETRIES; i++) { > err = setup_sata(); > if (err) { The issd stuff above is unrelated to the subject of this patch. It should be part of the next patch. Aside from that, Tested-by: Nikita Kiryanov -- Regards, Nikita Kiryanov