[U-Boot] [PATCH 3/3] usb: gadget: fastboot: terminate commands with NULL

[Steve Rae <srae@broadcom.com>]

On 14-09-30 12:05 PM, Eric Nelson wrote:
> Without NULL termination, various commands will read past the
> end of input. In particular, this was noticed with error()
> calls in cb_getvar and simple_strtoul() in cb_download.
>
> Since the download callback happens elsewhere, the 4k buffer
> should always be sufficient to handle command arguments.
>
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---
>   drivers/usb/gadget/f_fastboot.c | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 86700f5..0950ea8 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -542,6 +542,13 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
>   		error("unknown command: %s\n", cmdbuf);
>   		fastboot_tx_write_str("FAILunknown command");
>   	} else {
> +		if (req->actual < req->length) {
> +			u8 *buf = (u8 *)req->buf;
> +			buf[req->actual] = 0;
> +			func_cb(ep, req);
> +		} else {
> +			error("buffer overflow\n");
                         fastboot_tx_write_str("FAILbuffer overflow");
ADD this line
> +		}
>   		func_cb(ep, req);
AND delete this line (otherwise the func_cb() is called twice!!!)
>   	}
>
>
I have not experienced this issue, however, if it is to be accepted, 
then please update these two lines.... Afterwards:
Tested-by: Steve Rae <srae@broadcom.com>