From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena
Date: Thu, 09 Oct 2014 09:36:13 +0200 [thread overview]
Message-ID: <54363AED.3030302@denx.de> (raw)
In-Reply-To: <1412611339-22024-1-git-send-email-marex@denx.de>
Hi Marek,
On 06/10/2014 18:02, Marek Vasut wrote:
> Add support for the Kosagi Novena board. Currently supported are:
> - I2C busses
> - FEC Ethernet
> - MMC0, MMC1, Booting from MMC
> - SATA
> - USB ports
> - USB Ethernet
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Sean Cross <xobs@kosagi.com>
> Cc: Nikolay Dimitrov <picmaster@mail.bg>
> ---
> arch/arm/Kconfig | 4 +
> board/kosagi/novena/Kconfig | 23 ++
> board/kosagi/novena/Makefile | 11 +
> board/kosagi/novena/novena.c | 342 +++++++++++++++++++++++
> board/kosagi/novena/novena_spl.c | 581 +++++++++++++++++++++++++++++++++++++++
> board/kosagi/novena/setup.cfg | 47 ++++
> configs/novena_defconfig | 4 +
> include/configs/imx6_spl.h | 2 +-
> include/configs/novena.h | 303 ++++++++++++++++++++
> 9 files changed, 1316 insertions(+), 1 deletion(-)
> create mode 100644 board/kosagi/novena/Kconfig
> create mode 100644 board/kosagi/novena/Makefile
> create mode 100644 board/kosagi/novena/novena.c
> create mode 100644 board/kosagi/novena/novena_spl.c
> create mode 100644 board/kosagi/novena/setup.cfg
> create mode 100644 configs/novena_defconfig
> create mode 100644 include/configs/novena.h
>
> V2: - Drop the tegra_keyboard_init() comment altogether
> - Immediatelly return from the SD controller probe function on failure
> - Rename PFUZE100_PMIC to just PFUZE100
> - Fix the IMX OTP support with CMD_FUSE
> - Enabling LVDS clock is still in place, since this is coming soon.
> V3: - Zap rootpath builtin env
> V4: - Zap the checkpatch issues
> - Update comments
> V5: - Don't configure VGEN1
> - Set FPGA into reset in SPL
> - Drop ECSPI1 and add ECSPI3 mux
> - Drop UART1 and add UART3, UART4 muxes
> - Add separate mux option for the RGMII pins which doesn't set SPEED field
> - Move the configuration of RGMII after they were configured in GPIO mode
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 106aed9..4da1923 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -411,6 +411,9 @@ config TARGET_GW_VENTANA
> config TARGET_HUMMINGBOARD
> bool "Support hummingboard"
>
> +config TARGET_KOSAGI_NOVENA
> + bool "Support Kosagi Novena"
> +
> config TARGET_TQMA6
> bool "TQ Systems TQMa6 board"
>
> @@ -637,6 +640,7 @@ source "board/imx31_phycore/Kconfig"
> source "board/isee/igep0033/Kconfig"
> source "board/jornada/Kconfig"
> source "board/karo/tx25/Kconfig"
> +source "board/kosagi/novena/Kconfig"
> source "board/logicpd/imx27lite/Kconfig"
> source "board/logicpd/imx31_litekit/Kconfig"
> source "board/mpl/vcma9/Kconfig"
> diff --git a/board/kosagi/novena/Kconfig b/board/kosagi/novena/Kconfig
> new file mode 100644
> index 0000000..4e52be9
> --- /dev/null
> +++ b/board/kosagi/novena/Kconfig
> @@ -0,0 +1,23 @@
> +if TARGET_KOSAGI_NOVENA
> +
> +config SYS_CPU
> + string
> + default "armv7"
See http://patchwork.ozlabs.org/patch/397186/.
According to Masahiro, "strings" is not required and can be dropped.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2014-10-09 7:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-06 16:02 [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena Marek Vasut
2014-10-07 9:52 ` Sean Cross
2014-10-07 10:05 ` Marek Vasut
2014-10-07 21:55 ` Nikolay Dimitrov
2014-10-08 7:47 ` Sean Cross
2014-10-08 15:35 ` picmaster at mail.bg
2014-10-08 23:59 ` Marek Vasut
2014-10-09 0:13 ` Nikolay Dimitrov
2014-10-09 0:28 ` Marek Vasut
2014-10-09 1:04 ` Nikolay Dimitrov
2014-10-09 23:13 ` Marek Vasut
2014-10-09 7:31 ` Stefano Babic
2014-10-09 14:08 ` Marek Vasut
2014-10-09 5:32 ` Sean Cross
2014-10-09 5:38 ` Sean Cross
2014-10-09 11:48 ` Nikolay Dimitrov
2014-10-08 23:59 ` Marek Vasut
2014-10-09 7:36 ` Stefano Babic [this message]
2014-10-09 14:08 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54363AED.3030302@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox