From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Thu, 09 Oct 2014 09:36:13 +0200
Subject: [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena
In-Reply-To: <1412611339-22024-1-git-send-email-marex@denx.de>
References: <1412611339-22024-1-git-send-email-marex@denx.de>
Message-ID: <54363AED.3030302@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Marek,

On 06/10/2014 18:02, Marek Vasut wrote:
> Add support for the Kosagi Novena board. Currently supported are:
> - I2C busses
> - FEC Ethernet
> - MMC0, MMC1, Booting from MMC
> - SATA
> - USB ports
> - USB Ethernet
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Sean Cross <xobs@kosagi.com>
> Cc: Nikolay Dimitrov <picmaster@mail.bg>
> ---
>  arch/arm/Kconfig                 |   4 +
>  board/kosagi/novena/Kconfig      |  23 ++
>  board/kosagi/novena/Makefile     |  11 +
>  board/kosagi/novena/novena.c     | 342 +++++++++++++++++++++++
>  board/kosagi/novena/novena_spl.c | 581 +++++++++++++++++++++++++++++++++++++++
>  board/kosagi/novena/setup.cfg    |  47 ++++
>  configs/novena_defconfig         |   4 +
>  include/configs/imx6_spl.h       |   2 +-
>  include/configs/novena.h         | 303 ++++++++++++++++++++
>  9 files changed, 1316 insertions(+), 1 deletion(-)
>  create mode 100644 board/kosagi/novena/Kconfig
>  create mode 100644 board/kosagi/novena/Makefile
>  create mode 100644 board/kosagi/novena/novena.c
>  create mode 100644 board/kosagi/novena/novena_spl.c
>  create mode 100644 board/kosagi/novena/setup.cfg
>  create mode 100644 configs/novena_defconfig
>  create mode 100644 include/configs/novena.h
> 
> V2: - Drop the tegra_keyboard_init() comment altogether
>     - Immediatelly return from the SD controller probe function on failure
>     - Rename PFUZE100_PMIC to just PFUZE100
>     - Fix the IMX OTP support with CMD_FUSE
>     - Enabling LVDS clock is still in place, since this is coming soon.
> V3: - Zap rootpath builtin env
> V4: - Zap the checkpatch issues
>     - Update comments
> V5: - Don't configure VGEN1
>     - Set FPGA into reset in SPL
>     - Drop ECSPI1 and add ECSPI3 mux
>     - Drop UART1 and add UART3, UART4 muxes
>     - Add separate mux option for the RGMII pins which doesn't set SPEED field
>     - Move the configuration of RGMII after they were configured in GPIO mode
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 106aed9..4da1923 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -411,6 +411,9 @@ config TARGET_GW_VENTANA
>  config TARGET_HUMMINGBOARD
>  	bool "Support hummingboard"
>  
> +config TARGET_KOSAGI_NOVENA
> +	bool "Support Kosagi Novena"
> +
>  config TARGET_TQMA6
>  	bool "TQ Systems TQMa6 board"
>  
> @@ -637,6 +640,7 @@ source "board/imx31_phycore/Kconfig"
>  source "board/isee/igep0033/Kconfig"
>  source "board/jornada/Kconfig"
>  source "board/karo/tx25/Kconfig"
> +source "board/kosagi/novena/Kconfig"
>  source "board/logicpd/imx27lite/Kconfig"
>  source "board/logicpd/imx31_litekit/Kconfig"
>  source "board/mpl/vcma9/Kconfig"
> diff --git a/board/kosagi/novena/Kconfig b/board/kosagi/novena/Kconfig
> new file mode 100644
> index 0000000..4e52be9
> --- /dev/null
> +++ b/board/kosagi/novena/Kconfig
> @@ -0,0 +1,23 @@
> +if TARGET_KOSAGI_NOVENA
> +
> +config SYS_CPU
> +	string
> +	default "armv7"

See http://patchwork.ozlabs.org/patch/397186/.

According to Masahiro, "strings" is not required and can be dropped.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================