From: Sean Cross <xobs@kosagi.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena
Date: Sun, 12 Oct 2014 14:33:21 +0800 [thread overview]
Message-ID: <543A20B1.5000500@kosagi.com> (raw)
In-Reply-To: <CAOMZO5BCjLaZRZXsDxtr9U0PDsKUQ8cpTB6doDG24o19R4nTMw@mail.gmail.com>
On 12/10/2014 05:04, Fabio Estevam wrote:
> On Sat, Oct 11, 2014 at 11:21 AM, Sean Cross <xobs@kosagi.com> wrote:
>
>>> Ok, understood. Just curious: which Ethernet PHY is used on the novena board?
>> It's the same Micrel PHY used on the Sabrelite, the KSZ9021.
> nitrogen/sabrelite holds Ethernet PHY reset low for 10ms, which is in
> accordance with ksz9021 datasheet.
>
> Shouldn't we wait 10ms here as well?
The reference manual for the PHY indicates that you should hold reset
low for 10ms after the supply voltage stabilizes. So long as it takes
at least 10msto get from the point at which the CPU starts executing its
ROM code to the point at which the reset line is toggled, we will be fine.
Sean
next prev parent reply other threads:[~2014-10-12 6:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-11 1:14 [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena Marek Vasut
2014-10-11 1:39 ` Fabio Estevam
2014-10-11 5:01 ` Nikolay Dimitrov
2014-10-11 13:56 ` Fabio Estevam
2014-10-11 14:21 ` Sean Cross
2014-10-11 21:04 ` Fabio Estevam
2014-10-12 6:33 ` Sean Cross [this message]
2014-10-14 21:38 ` Marek Vasut
2014-10-15 4:47 ` Nikolay Dimitrov
2014-10-15 7:47 ` Sean Cross
2014-10-15 19:16 ` Nikolay Dimitrov
2014-10-16 2:38 ` Sean Cross
2014-10-16 23:32 ` Fabio Estevam
2014-10-16 10:21 ` Marek Vasut
2014-10-16 17:17 ` Fabio Estevam
2014-10-16 23:02 ` Marek Vasut
2014-10-16 23:27 ` Fabio Estevam
2014-10-17 13:55 ` Marek Vasut
2014-10-14 21:40 ` Marek Vasut
2014-10-11 1:44 ` Fabio Estevam
2014-10-11 18:43 ` Marek Vasut
2014-10-11 20:56 ` Fabio Estevam
2014-10-11 5:10 ` Nikolay Dimitrov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=543A20B1.5000500@kosagi.com \
--to=xobs@kosagi.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox