From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Sun, 12 Oct 2014 10:32:03 +0200 Subject: [U-Boot] [PATCH v2 2/5] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option In-Reply-To: <1413042046.11505.29.camel@hellion.org.uk> References: <1412618265-4053-1-git-send-email-hdegoede@redhat.com> <1412618265-4053-3-git-send-email-hdegoede@redhat.com> <1413042046.11505.29.camel@hellion.org.uk> Message-ID: <543A3C83.6030409@redhat.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 10/11/2014 05:40 PM, Ian Campbell wrote: > On Mon, 2014-10-06 at 19:57 +0200, Hans de Goede wrote: >> Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL >> check is not necessary with Kconfig, because only options explicitly marked >> as also being for the SPL get set during SPL builds. >> >> Signed-off-by: Hans de Goede >> --- >> board/sunxi/Kconfig | 8 ++++++++ >> board/sunxi/board.c | 2 +- >> 2 files changed, 9 insertions(+), 1 deletion(-) >> >> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig >> index 497b093..cb4a881 100644 >> --- a/board/sunxi/Kconfig >> +++ b/board/sunxi/Kconfig >> @@ -32,6 +32,14 @@ config USB_KEYBOARD >> Say Y here to add support for using a USB keyboard (typically used >> in combination with a graphical console on HDMI). >> >> +config MMC_SUNXI_SLOT_EXTRA >> + int "mmc extra slot number" >> + default -1 >> + ---help--- >> + sunxi builds always enable mmc0, some boards also have a sdcard slot >> + or emmc on mmc2 or mmc3. Setting this to 2 or 3 will enable support >> + for this. > > What happened to mmc1? When writing this I was under the assumption that nothing was actually using mmc1, I will fix the help text. > > Regardless: > > Acked-by: Ian Campbell Regards, Hans