From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Tue, 14 Oct 2014 13:21:05 -0700 Subject: [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR In-Reply-To: References: <1412600096-3928-1-git-send-email-Ashish.Kumar@freescale.com> <543D8412.1080402@freescale.com> Message-ID: <543D85B1.1030301@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/14/2014 01:19 PM, Kumar Ashish-B37399 wrote: > Hi York, > > Yes, I should superseed/reject the below patches > > http://patchwork.ozlabs.org/patch/391991/ I think your v2 patch reduced the size of SPI. Please check before you mark them superseded. York > http://patchwork.ozlabs.org/patch/391990/ > > Regards > Ashish > > -----Original Message----- > From: Sun York-R58495 > Sent: Wednesday, October 15, 2014 1:44 AM > To: Kumar Ashish-B37399; u-Boot at lists.denx.de > Cc: Wood Scott-B07421 > Subject: Re: [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR > > On 10/06/2014 05:54 AM, Ashish Kumar wrote: >> * fdt_fixup_mtdparts is called from ft_board_setup >> * run "mtdparts default" to create NAND, NOR partition on uboot >> * Use mtdparts to create partitions dynamically rather >> than using static partitions in device tree >> >> Signed-off-by: Ashish Kumar >> --- >> board/freescale/bsc9132qds/bsc9132qds.c | 12 ++++++++++++ >> include/configs/BSC9132QDS.h | 21 +++++++++++++++++++++ >> 2 files changed, 33 insertions(+), 0 deletions(-) >> >> diff --git a/board/freescale/bsc9132qds/bsc9132qds.c >> b/board/freescale/bsc9132qds/bsc9132qds.c >> index 10580bc..c88838b 100644 >> --- a/board/freescale/bsc9132qds/bsc9132qds.c >> +++ b/board/freescale/bsc9132qds/bsc9132qds.c >> @@ -21,6 +21,9 @@ >> #include >> #include >> #include >> +#include >> +#include >> +#include >> >> #ifdef CONFIG_PCI >> #include >> @@ -354,6 +357,12 @@ void fdt_del_node_compat(void *blob, const char >> *compatible) } >> >> #if defined(CONFIG_OF_BOARD_SETUP) >> +#ifdef CONFIG_FDT_FIXUP_PARTITIONS >> +struct node_info nodes[] = { >> + { "cfi-flash", MTD_DEV_TYPE_NOR, }, >> + { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, >> +}; >> +#endif >> void ft_board_setup(void *blob, bd_t *bd) { >> phys_addr_t base; >> @@ -369,6 +378,9 @@ void ft_board_setup(void *blob, bd_t *bd) >> #endif >> >> fdt_fixup_memory(blob, (u64)base, (u64)size); >> +#ifdef CONFIG_FDT_FIXUP_PARTITIONS >> + fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); #endif >> >> ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); >> u32 porbmsr = in_be32(&gur->porbmsr); diff --git >> a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index >> aeded6d..da78a19 100644 >> --- a/include/configs/BSC9132QDS.h >> +++ b/include/configs/BSC9132QDS.h >> @@ -630,6 +630,27 @@ combinations. this should be removed later >> #endif >> >> /* >> + * Dynamic MTD Partition support with mtdparts */ #ifndef >> +CONFIG_SYS_NO_FLASH #define CONFIG_MTD_DEVICE #define >> +CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS #define >> +CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT >> +"nor0=88000000.nor,nand0=ff800000.flash," >> +#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \ >> + "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \ >> + "8m(kernel),512k(dtb),-(fs)" >> +#endif > > > Isn't this patch conflict with your earlier patch? > http://patchwork.ozlabs.org/patch/391991/ > > York >