From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jeroen Hofstee <jeroen@myspectrum.nl>
Date: Wed, 22 Oct 2014 15:13:25 +0200
Subject: [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support
In-Reply-To: <CAOMZO5BV455=xoOp74Ug85PR2fz9pWOFk8TyNdS6GP1-5ftybg@mail.gmail.com>
References: <1413933293-23139-1-git-send-email-festevam@gmail.com>	<54476F35.70406@myspectrum.nl>	<CAOMZO5BBeerRLh7U12-tM534wMeWKjNOpEG=OhiWB=MngaUE5Q@mail.gmail.com>	<5447AC2C.9020206@myspectrum.nl>
	<CAOMZO5BV455=xoOp74Ug85PR2fz9pWOFk8TyNdS6GP1-5ftybg@mail.gmail.com>
Message-ID: <5447AD75.4040404@myspectrum.nl>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


On 22-10-14 15:10, Fabio Estevam wrote:
> On Wed, Oct 22, 2014 at 11:07 AM, Jeroen Hofstee <jeroen@myspectrum.nl> wrote:
>
>> Did you check this with a scope? I am quite sure I needed to do this for
>> u-boot v2014.10 still, but I don't have the board available now to
>> double check.
> I didn't check it with the scope. If I add FB_SYNC_CLK_LAT_FALL then I
> get a completely bad image in the display.
>
> Regards,
>
> Fabio Estevam

ok, thanks. If I will have a better look why I needed to set this once
I have a chance.

Regards,
Jeroen