[U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260

["Andreas Bießmann" <andreas.devel@googlemail.com>]

It also seems the maintainer of snapper9260 is not reachable. Simon, do
you own such a board?

Best regards

Andreas Bie?mann

On 23.10.14 07:07, Andreas Bie?mann wrote:
> Dear Simon,
> 
> On 06.10.14 20:14, Simon Glass wrote:
>> The value should be 0x23f00000. Fix it.
>>
>> Signed-off-by: Simon Glass <sjg@chromium.org> ---
>>
>> include/configs/snapper9260.h | 2 +- 1 file changed, 1 
>> insertion(+), 1 deletion(-)
>>
>> diff --git a/include/configs/snapper9260.h 
>> b/include/configs/snapper9260.h index 1ebee71..adb09c2 100644 --- 
>> a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h
>> @@ -15,7 +15,7 @@ #include <asm/hardware.h> #include
>> <linux/sizes.h>
>>
>> -#define CONFIG_SYS_TEXT_BASE		0x20000000 +#define 
>> CONFIG_SYS_TEXT_BASE		0x23f00000
> 
> I wonder why this is required. It depends on the first stage loader
> snapper9260 uses and I guess the first value is the right one used in
> the factory programmed loader.
> Nevertheless other at91 boards use 0x21f00000 due to relocation issues
> on boards with less RAM. It seems the snapper9260 has just 64MiB of
> RAM, this means just 1MiB of space for relocated u-boot, malloc arena,
> ... This was exactly the reason for other at91 boards to switch to
> 0x21f00000 as base address.
> 
> Best regards
> 
> Andreas Bie?mann
>