[U-Boot] Please pull u-boot-sunxi/master into master

[Hans de Goede <hdegoede@redhat.com>]

<resend with proper Cc-s added>

Hi Tom,

Please pull  u-boot-sunxi/master into master, highlights:

1) Preliminary A31 (sun6i) and A23 (sun8i) support, preliminary because we
lack SPL support for now, so Allwinner's boot0 + boot1 loaders must be used to
bootstrap

2) Support for the secondary mmc slot found on some boards, including booting
from the eMMC on the Mele-M3.

3) Support for booting old linux-sunxi kernels on sun4i and sun5i through
CONFIG_OLD_SUNXI_KERNEL_COMPAT Kconfig option (sun7i is wip)

The following changes since commit 5b3ee386fde82a1ba42ff09b95247842c9a1585e:

  kbuild: clear VENDOR variable to fix build error on tcsh (2014-10-23 16:35:12 -0400)

are available in the git repository at:

  http://git.denx.de/u-boot-sunxi.git

for you to fetch changes up to accc9e446be6c3bd129315a0c5830bddccfa16da:

  sunxi: Add CONFIG_OLD_SUNXI_KERNEL_COMPAT Kconfig option (2014-10-24 09:37:26 +0200)

----------------------------------------------------------------
Chen-Yu Tsai (16):
      ARM: sunxi: Use macro values for setting UART GPIO pull-ups
      ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined
      ARM: sun6i: Add clock support
      ARM: sun6i: Define UART0 pins for A31
      ARM: sun6i: Add Colombus board defconfig
      ARM: sunxi: Fix build break when CONFIG_MMC is not defined
      ARM: sunxi: Move watchdog register definitions to separate file
      ARM: sunxi: Add sun6i/sun8i timer block register definition
      ARM: sunxi: Fix reset command on sun6i/sun8i
      ARM: sunxi: Add sun8i (A23) UART0 pin mux support
      ARM: sunxi: Add support for uart0 on port F (mmc0)
      mmc: sunxi: Add support for sun8i (A23)
      ARM: sunxi: Add basic A23 support
      ARM: sunxi: Allow specifying module in prcm apb0 init function
      ARM: sunxi: Add support for using R_UART as console
      ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig

Hans de Goede (13):
      sunxi: Add support for the Mele M3 board
      ARM: sunxi-mmc: Add mmc support for sun6i / A31
      sunxi: Add mmc card-detect functionality
      sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option
      sunxi: When we've both mmc0 and mmc2, detect from which one we're booting
      sunxi: Use PG3 - PG8 as io-pins for mmc1
      sunxi: Enable second sdcard slot found on some boards
      sunxi: Kconfig: Unify sunxi Kconfig code
      sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i
      ARM: sunxi: Add support for R_PIO gpio banks
      sunxi: Add clock_get_pll5p() function
      sunxi: dram: Use clock_get_pll5p to calculate mbus, rather then hardcoding
      sunxi: Add CONFIG_OLD_SUNXI_KERNEL_COMPAT Kconfig option

Iain Paton (1):
      sun7i: Add support for Olimex A20-OLinuXino-LIME2

Ian Campbell (1):
      sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE)

Maxime Ripard (2):
      ARM: sun6i: Setup the A31 UART0 muxing
      ARM: sunxi: Add basic A31 support

Oliver Schinagl (2):
      ARM: sun6i: Add base address for the new controllers in A31
      ARM: sun6i: Add support for the power reset control module found on the A31

Wills Wang (1):
      mmc: sunxi: add SDHC support for sun6i/sun7i/sun8i

 arch/arm/Kconfig                              |   6 +
 arch/arm/cpu/armv7/sunxi/Makefile             |   4 +
 arch/arm/cpu/armv7/sunxi/board.c              |  38 +++-
 arch/arm/cpu/armv7/sunxi/clock_sun4i.c        |  11 ++
 arch/arm/cpu/armv7/sunxi/clock_sun6i.c        |  76 ++++++++
 arch/arm/cpu/armv7/sunxi/cpu_info.c           |   4 +
 arch/arm/cpu/armv7/sunxi/dram.c               |  36 ++--
 arch/arm/cpu/armv7/sunxi/prcm.c               |  35 ++++
 arch/arm/include/asm/arch-sunxi/clock.h       |   5 +
 arch/arm/include/asm/arch-sunxi/clock_sun4i.h |   3 +
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 205 ++++++++++++++++++++++
 arch/arm/include/asm/arch-sunxi/cpu.h         |  10 ++
 arch/arm/include/asm/arch-sunxi/gpio.h        |  45 ++++-
 arch/arm/include/asm/arch-sunxi/mmc.h         |   7 +-
 arch/arm/include/asm/arch-sunxi/prcm.h        | 238 ++++++++++++++++++++++++++
 arch/arm/include/asm/arch-sunxi/timer.h       |  23 +--
 arch/arm/include/asm/arch-sunxi/watchdog.h    |  44 +++++
 board/sunxi/Kconfig                           |  68 +++++---
 board/sunxi/MAINTAINERS                       |  17 ++
 board/sunxi/Makefile                          |   2 +
 board/sunxi/board.c                           |  38 +++-
 board/sunxi/dram_a20_olinuxino_l2.c           |  31 ++++
 configs/A10s-OLinuXino-M_defconfig            |   3 +
 configs/A20-OLinuXino-Lime2_defconfig         |   5 +
 configs/A20-OLinuXino_MICRO_defconfig         |   3 +
 configs/Colombus_defconfig                    |   4 +
 configs/Ippo_q8h_defconfig                    |   4 +
 configs/Mele_M3_defconfig                     |   7 +
 drivers/mmc/sunxi_mmc.c                       |  42 ++++-
 include/configs/sun4i.h                       |   1 +
 include/configs/sun5i.h                       |   1 +
 include/configs/sun6i.h                       |  26 +++
 include/configs/sun7i.h                       |   1 +
 include/configs/sun8i.h                       |  23 +++
 include/configs/sunxi-common.h                |  24 ++-
 35 files changed, 1010 insertions(+), 80 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/sunxi/clock_sun6i.c
 create mode 100644 arch/arm/cpu/armv7/sunxi/prcm.c
 create mode 100644 arch/arm/include/asm/arch-sunxi/clock_sun6i.h
 create mode 100644 arch/arm/include/asm/arch-sunxi/prcm.h
 create mode 100644 arch/arm/include/asm/arch-sunxi/watchdog.h
 create mode 100644 board/sunxi/dram_a20_olinuxino_l2.c
 create mode 100644 configs/A20-OLinuXino-Lime2_defconfig
 create mode 100644 configs/Colombus_defconfig
 create mode 100644 configs/Ippo_q8h_defconfig
 create mode 100644 configs/Mele_M3_defconfig
 create mode 100644 include/configs/sun6i.h
 create mode 100644 include/configs/sun8i.h

Regards,

Hans