[U-Boot] [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello Simon,

On 10/28/2014 05:31 PM, Przemyslaw Marczak wrote:
> After remove the offsets in Exynos4/4x12 gpio enums,
> an additional gpio base addresses are required.
>
> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
> ---
>   arch/arm/include/asm/arch-exynos/cpu.h | 9 +++++++++
>   1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
> index ba71714..78aceef 100644
> --- a/arch/arm/include/asm/arch-exynos/cpu.h
> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
> @@ -29,6 +29,8 @@
>   #define EXYNOS4_MIU_BASE		0x10600000
>   #define EXYNOS4_ACE_SFR_BASE		0x10830000
>   #define EXYNOS4_GPIO_PART2_BASE		0x11000000
> +#define EXYNOS4_GPIO_PART2_0		0x11000000 /* GPJ0 */
> +#define EXYNOS4_GPIO_PART2_1		0x11000c00 /* GPX0 */
>   #define EXYNOS4_GPIO_PART1_BASE		0x11400000
>   #define EXYNOS4_FIMD_BASE		0x11C00000
>   #define EXYNOS4_MIPI_DSIM_BASE		0x11C80000
> @@ -70,7 +72,14 @@
>   #define EXYNOS4X12_GPIO_PART4_BASE	0x106E0000
>   #define EXYNOS4X12_ACE_SFR_BASE		0x10830000
>   #define EXYNOS4X12_GPIO_PART2_BASE	0x11000000
> +#define EXYNOS4X12_GPIO_PART2_0		0x11000000
> +#define EXYNOS4X12_GPIO_PART2_1		0x11000040 /* GPK0 */
> +#define EXYNOS4X12_GPIO_PART2_2		0x11000260 /* GPM0 */
> +#define EXYNOS4X12_GPIO_PART2_3		0x11000c00 /* GPX0 */
>   #define EXYNOS4X12_GPIO_PART1_BASE	0x11400000
> +#define EXYNOS4X12_GPIO_PART1_0		0x11400000 /* GPA0 */
> +#define EXYNOS4X12_GPIO_PART1_1		0x11400180 /* GPF0 */
> +#define EXYNOS4X12_GPIO_PART1_2		0x11400240 /* GPJ0 */
>   #define EXYNOS4X12_FIMD_BASE		0x11C00000
>   #define EXYNOS4X12_MIPI_DSIM_BASE	0x11C80000
>   #define EXYNOS4X12_USBOTG_BASE		0x12480000
>

Please check the fixed patches.
I missed the changelog, so:
- [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses
   Commit message cleanup

- [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses
   Commit message cleanup

- [PATCH 3/3] odroid: adjust gpio calls to dm gpio api
   Remove the redundant sprintf calls and put the strings directly into 
the gpio_request() calls.

The gpio parts sub base addresses stays unchanged. I think that breaking 
the "pretty" names is reasonable here.

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com