[U-Boot] [PATCH V2 1/4] arm: mx6: cm_fx6: change issd gpio order

[Nikita Kiryanov <nikita@compulab.co.il>]

Forgot the changelog:

On 29/10/14 17:56, Nikita Kiryanov wrote:
> Change the order in which GPIOs are toggled in SATA init sequence to
> accomodate both SanDisk and Phison SSDs.
>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
Changes in V2:
	- No changes.

>   board/compulab/cm_fx6/cm_fx6.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
> index 82681b1..0206ae8 100644
> --- a/board/compulab/cm_fx6/cm_fx6.c
> +++ b/board/compulab/cm_fx6/cm_fx6.c
> @@ -31,12 +31,12 @@ DECLARE_GLOBAL_DATA_PTR;
>   #ifdef CONFIG_DWC_AHSATA
>   static int cm_fx6_issd_gpios[] = {
>   	/* The order of the GPIOs in the array is important! */
> +	CM_FX6_SATA_LDO_EN,
>   	CM_FX6_SATA_PHY_SLP,
>   	CM_FX6_SATA_NRSTDLY,
>   	CM_FX6_SATA_PWREN,
>   	CM_FX6_SATA_NSTANDBY1,
>   	CM_FX6_SATA_NSTANDBY2,
> -	CM_FX6_SATA_LDO_EN,
>   };
>
>   static void cm_fx6_sata_power(int on)
>

-- 
Regards,
Nikita Kiryanov