From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nikita Kiryanov Date: Wed, 29 Oct 2014 18:01:40 +0200 Subject: [U-Boot] [PATCH V2 1/4] arm: mx6: cm_fx6: change issd gpio order In-Reply-To: <1414598184-1963-2-git-send-email-nikita@compulab.co.il> References: <1414598184-1963-1-git-send-email-nikita@compulab.co.il> <1414598184-1963-2-git-send-email-nikita@compulab.co.il> Message-ID: <54510F64.1080703@compulab.co.il> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Forgot the changelog: On 29/10/14 17:56, Nikita Kiryanov wrote: > Change the order in which GPIOs are toggled in SATA init sequence to > accomodate both SanDisk and Phison SSDs. > > Signed-off-by: Nikita Kiryanov > Cc: Igor Grinberg > Cc: Stefano Babic > --- Changes in V2: - No changes. > board/compulab/cm_fx6/cm_fx6.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c > index 82681b1..0206ae8 100644 > --- a/board/compulab/cm_fx6/cm_fx6.c > +++ b/board/compulab/cm_fx6/cm_fx6.c > @@ -31,12 +31,12 @@ DECLARE_GLOBAL_DATA_PTR; > #ifdef CONFIG_DWC_AHSATA > static int cm_fx6_issd_gpios[] = { > /* The order of the GPIOs in the array is important! */ > + CM_FX6_SATA_LDO_EN, > CM_FX6_SATA_PHY_SLP, > CM_FX6_SATA_NRSTDLY, > CM_FX6_SATA_PWREN, > CM_FX6_SATA_NSTANDBY1, > CM_FX6_SATA_NSTANDBY2, > - CM_FX6_SATA_LDO_EN, > }; > > static void cm_fx6_sata_power(int on) > -- Regards, Nikita Kiryanov