[U-Boot] [u-boot][PATCH] omap3_beagle: Fix device tree boot

[Roger Quadros <rogerq@ti.com>]

On 11/05/2014 04:18 PM, Tom Rini wrote:
> On Wed, Nov 05, 2014 at 03:57:34PM +0200, Roger Quadros wrote:
> 
>> Push the device tree blob load address (fdtaddr) further apart than
>> kernel load address (loadaddr) to accomodate a larger kernel image.
>> We set fdtaddr to the same value as set in ti_armv7_common.h.
>>
>> With this change, I'm able to boot linux-3.18-rc1 zImage built using
>> omap2plus_defconfig.
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  include/configs/omap3_beagle.h | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
>> index f25a940..5ea048a 100644
>> --- a/include/configs/omap3_beagle.h
>> +++ b/include/configs/omap3_beagle.h
>> @@ -132,7 +132,7 @@
>>  	"loadaddr=0x80200000\0" \
>>  	"rdaddr=0x81000000\0" \
>>  	"fdt_high=0xffffffff\0" \
>> -	"fdtaddr=0x80f80000\0" \
>> +	"fdtaddr=0x88000000\0" \
> 
> While we're in here whacking these values lets make this match up the
> rest of the values we use in ti_armv7_common.h (so drop fdt_high and set
> bootm_size and so forth).  Thanks!
> 
It seems like omap3_beagle.h includes ti_omap3_common.h which in turn includes
ti_armv7_common.h.

So I just need to remove the duplicate definitions from omap3_beagle.h

cheers,
-roger