[U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi

[Stefan Roese <sr@denx.de>]

Hi Simon,

On 07.11.2014 18:21, Simon Glass wrote:
>> +               qspi: spi at ff705000 {
>> +                       compatible = "cadence,qspi";
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       reg = <0xff705000 0x1000>,
>> +                               <0xffa00000 0x1000>;
>> +                       interrupts = <0 151 4>;
>> +                       clocks = <&qspi_clk>;
>> +                       ext-decoder = <0>;  /* external decoder */
>> +                       num-chipselect = <4>;
>> +                       fifo-depth = <128>;
>> +                       bus-num = <2>;
>> +                       status = "disabled";
>> +               };
>> +
>
> Is this the same binding as Linux? Can you please bring in the binding
> document too? Some of these feel like they should have a
> "manufacture," prefix.

Yes, its from Linux. But not from kernel.org but from the Altera 
Rocketboards.org version (v3.16). So the bindings might change if this 
driver would be pushed to mainline Linux.

Sure, I can include the binding document as well. Good idea.

Thanks,
Stefan