From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 09 Nov 2014 22:24:42 +0100 Subject: [U-Boot] [PATCH v3 4/8] imx6: add some flexibility for defining macros In-Reply-To: <1415482079-9531-5-git-send-email-john.tobias.ph@gmail.com> References: <1415482079-9531-1-git-send-email-john.tobias.ph@gmail.com> <1415482079-9531-5-git-send-email-john.tobias.ph@gmail.com> Message-ID: <545FDB9A.6040005@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/11/2014 22:27, John Tobias wrote: > iMX6 SabreSD has different stack address compare > to the default stack address defined on the file. > > The CONFIG_SYS_TEXT_BASE is defined in mx6sabre_common.h which is > same address defined on file. At the same time to avoid compilation > warnings. > --- > include/configs/imx6_spl.h | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > index 5a5f940..4ff37b3 100644 > --- a/include/configs/imx6_spl.h > +++ b/include/configs/imx6_spl.h > @@ -29,7 +29,9 @@ > #define CONFIG_SPL_TEXT_BASE 0x00908000 > #define CONFIG_SPL_MAX_SIZE 0x10000 > #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" > +#ifndef CONFIG_SPL_STACK > #define CONFIG_SPL_STACK 0x0091FFB8 > +#endif Why is this required ? > #define CONFIG_SPL_LIBCOMMON_SUPPORT > #define CONFIG_SPL_LIBGENERIC_SUPPORT > #define CONFIG_SPL_SERIAL_SUPPORT > @@ -66,7 +68,9 @@ > #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ > #define CONFIG_SYS_SPL_MALLOC_START 0x18300000 > #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ > +#ifndef CONFIG_SYS_TEXT_BASE > #define CONFIG_SYS_TEXT_BASE 0x17800000 > #endif > +#endif > Why is this required ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================