[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

please pull from u-boot-imx. novena is still broken, Masahiro provides
the patch for fix it.


The following changes since commit 63f7af9a4cfb4a3b9136674c6612c6d13957c2cd:

  Merge branch 'master' of git://git.denx.de/u-boot-uniphier (2014-11-11
15:49:10 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 05d492a3235df397da6200294ea2a802749372a8:

  arm: mx6: add support for TBS2910 Matrix ARM miniPC (2014-11-13
18:09:23 +0100)

----------------------------------------------------------------
Christian Gmeiner (2):
      ot1200: add support for EHCI
      ot1200: fix card detect for usdhc4

Fabio Estevam (4):
      mx28evk: README: Revision C is also supported
      mx53loco: Change 'fdt_file' dynamically
      mx6sabresd: Fix error handling in board_mmc_init()
      mx6sabresd: Staticize when possible

John Tobias (5):
      imx6: add spl config for mx6sabresd
      imx6: add data configuration file for SPL
      kconfig: imx6: add SUPPORT_SPL
      imx6: add spl in the header file
      imx6: SPL support for iMX6 SabreSD

Nikita Kiryanov (1):
      arm: imx: make bmode command work with SPL/U-Boot combo

Nikolay Dimitrov (1):
      mx6: video_skip: Fix crash on NULL pointer

Soeren Moch (1):
      arm: mx6: add support for TBS2910 Matrix ARM miniPC

Ye.Li (2):
      imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position
      imx: mx6q/dlsabreauto: And NAND flash support

 arch/arm/Kconfig                              |   5 +
 arch/arm/cpu/armv7/mx6/soc.c                  |   4 +-
 arch/arm/imx-common/spl.c                     |   5 +-
 arch/arm/imx-common/video.c                   |   6 +-
 board/bachmann/ot1200/ot1200.c                |   4 +-
 board/freescale/mx28evk/README                |   2 +-
 board/freescale/mx53loco/mx53loco.c           |   4 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  66 +++++
 board/freescale/mx6sabresd/mx6sabresd.c       | 208 +++++++++++++-
 board/freescale/mx6sabresd/mx6sabresd_spl.cfg |  58 ++++
 board/tbs/tbs2910/Kconfig                     |  23 ++
 board/tbs/tbs2910/MAINTAINERS                 |   6 +
 board/tbs/tbs2910/Makefile                    |   7 +
 board/tbs/tbs2910/tbs2910.c                   | 398
++++++++++++++++++++++++++
 configs/mx6sabresd_spl_defconfig              |   5 +
 configs/tbs2910_defconfig                     |   3 +
 include/configs/mx53loco.h                    |   1 -
 include/configs/mx6qsabreauto.h               |  16 ++
 include/configs/mx6sabre_common.h             |   2 +-
 include/configs/mx6sabresd.h                  |   6 +
 include/configs/ot1200.h                      |   7 +
 include/configs/tbs2910.h                     | 242 ++++++++++++++++
 22 files changed, 1056 insertions(+), 22 deletions(-)
 create mode 100644 board/freescale/mx6sabresd/mx6sabresd_spl.cfg
 create mode 100644 board/tbs/tbs2910/Kconfig
 create mode 100644 board/tbs/tbs2910/MAINTAINERS
 create mode 100644 board/tbs/tbs2910/Makefile
 create mode 100644 board/tbs/tbs2910/tbs2910.c
 create mode 100644 configs/mx6sabresd_spl_defconfig
 create mode 100644 configs/tbs2910_defconfig
 create mode 100644 include/configs/tbs2910.h

Thanks,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================