[U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 11/17/2014 07:39 PM, Simon Glass wrote:
> Hi Hans,
> 
> On 17 November 2014 15:48, Hans de Goede <hdegoede@redhat.com> wrote:
>> From: Luc Verhaegen <libv@skynet.be>
>>
>> Add simplefb support, note this depends on the kernel having support for
>> the clocks property which has recently been added to the simplefb devicetree
>> binding.
>>
>> Signed-off-by: Luc Verhaegen <libv@skynet.be>
>> [hdegoede at redhat.com: Use pre-populated simplefb node under /chosen as
>>  disussed on the devicetree list]
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>  arch/arm/include/asm/arch-sunxi/display.h |  4 ++++
>>  board/sunxi/board.c                       | 11 +++++++++
>>  drivers/video/sunxi_display.c             | 39 +++++++++++++++++++++++++++++++
>>  include/configs/sunxi-common.h            |  8 +++++++
>>  4 files changed, 62 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h
>> index 8d80ceb..4c694f8 100644
>> --- a/arch/arm/include/asm/arch-sunxi/display.h
>> +++ b/arch/arm/include/asm/arch-sunxi/display.h
>> @@ -195,4 +195,8 @@ struct sunxi_hdmi_reg {
>>  #define SUNXI_HDMI_PLL_DBG0_PLL3               (0 << 21)
>>  #define SUNXI_HDMI_PLL_DBG0_PLL7               (1 << 21)
>>
>> +#ifdef CONFIG_VIDEO_DT_SIMPLEFB
>> +void sunxi_simplefb_setup(void *blob);
>> +#endif
>> +
>>  #endif /* _SUNXI_DISPLAY_H */
>> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
>> index e6ec5b8..d4530e8 100644
>> --- a/board/sunxi/board.c
>> +++ b/board/sunxi/board.c
>> @@ -24,6 +24,7 @@
>>  #endif
>>  #include <asm/arch/clock.h>
>>  #include <asm/arch/cpu.h>
>> +#include <asm/arch/display.h>
>>  #include <asm/arch/dram.h>
>>  #include <asm/arch/gpio.h>
>>  #include <asm/arch/mmc.h>
>> @@ -237,3 +238,13 @@ int misc_init_r(void)
>>         return 0;
>>  }
>>  #endif
>> +
>> +#ifdef CONFIG_OF_BOARD_SETUP
>> +void
>> +ft_board_setup(void *blob, bd_t *bd)
>> +{
>> +#ifdef CONFIG_VIDEO_DT_SIMPLEFB
>> +       sunxi_simplefb_setup(blob);
>> +#endif
>> +}
>> +#endif /* CONFIG_OF_BOARD_SETUP */
>> diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
>> index 3f46c31..74c4bd3 100644
>> --- a/drivers/video/sunxi_display.c
>> +++ b/drivers/video/sunxi_display.c
>> @@ -13,6 +13,8 @@
>>  #include <asm/arch/display.h>
>>  #include <asm/global_data.h>
>>  #include <asm/io.h>
>> +#include <fdtdec.h>
>> +#include <fdt_support.h>
>>  #include <linux/fb.h>
>>  #include <video_fb.h>
>>
>> @@ -416,3 +418,40 @@ video_hw_init(void)
>>
>>         return graphic_device;
>>  }
>> +
>> +/*
>> + * Simplefb support.
>> + */
>> +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB)
>> +void
>> +sunxi_simplefb_setup(void *blob)
>> +{
>> +       static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
>> +       int offset, ret;
>> +
>> +       if (!sunxi_display.enabled)
>> +               return;
> 
> return -ENOENT?

If people want this, I can change the proto to an int and make sunxi_simplefb_setup
return error codes as you suggest, but this function gets called from
ft_board_setup which is void itself, so there is no where to propagate the error,
and more-over we do not want simplefb setup errors to be treated as fatal, so
I see little use in having it return error codes.

>> +
>> +       /* Find a framebuffer node, with pipeline == "de_be0-lcd0-hdmi" */
>> +       offset = fdt_node_offset_by_compatible(blob, -1, "sunxi,framebuffer");
> 
> These should convert to DM at some point. To make sure we don't forget
> any, you should add this compatible string to fdtdec.c and use the
> enum from fdtdec.h and also fdtdec_next_compatible().

Most sunxi boards do not set CONFIG_OF_CONTROL, so the ftddec functions are
not available.

>> +       while (offset >= 0) {
>> +               ret = fdt_find_string(blob, offset, "sunxi,pipeline",
>> +                                     "de_be0-lcd0-hdmi");
>> +               if (ret == 0)
>> +                       break;
>> +               offset = fdt_node_offset_by_compatible(blob, offset,
>> +                                                      "sunxi,framebuffer");
>> +       }
>> +       if (offset < 0) {
>> +               eprintf("Cannot setup simplefb: node not found\n");
>> +               return;
> 
> return -ENODEV?
> 
>> +       }
>> +
>> +       ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base,
>> +                       graphic_device->winSizeX, graphic_device->winSizeY,
>> +                       graphic_device->winSizeX * graphic_device->gdfBytesPP,
>> +                       "x8r8g8b8");
>> +       if (ret < 0)
>> +               eprintf("Cannot setup simplefb: Error setting properties\n");
> 
> Can we return the error here? Maybe -EPERM or something like that.
> 
>> +}
>> +#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */
>> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
>> index 900ef52..d5d907b 100644
>> --- a/include/configs/sunxi-common.h
>> +++ b/include/configs/sunxi-common.h
>> @@ -204,6 +204,9 @@
>>   */
>>  #define CONFIG_SUNXI_FB_SIZE (8 << 20)
>>
>> +/* Do we want to initialize a simple FB? */
>> +#define CONFIG_VIDEO_DT_SIMPLEFB
>> +
>>  #define CONFIG_VIDEO_SUNXI
>>
>>  #define CONFIG_CFB_CONSOLE
>> @@ -217,6 +220,11 @@
>>
>>  #define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
>>
>> +/* To be able to hook simplefb into dt */
>> +#ifdef CONFIG_VIDEO_DT_SIMPLEFB
>> +#define CONFIG_OF_BOARD_SETUP
>> +#endif
>> +
>>  #endif /* CONFIG_VIDEO */
>>
>>  /* Ethernet support */

Regards,

Hans