From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 20 Nov 2014 10:29:28 +0100 Subject: [U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code In-Reply-To: <201411142107.31651.marex@denx.de> References: <1415965022-4912-1-git-send-email-festevam@gmail.com> <1415965022-4912-3-git-send-email-festevam@gmail.com> <201411142107.31651.marex@denx.de> Message-ID: <546DB478.1010101@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 14/11/2014 21:07, Marek Vasut wrote: > On Friday, November 14, 2014 at 12:37:01 PM, Fabio Estevam wrote: >> From: Fabio Estevam >> >> mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR. >> >> Move the configuration to the spl code. >> >> CCM_CCOSR setting is no longer required to get audio functionality in the >> kernel, so remove such setting. >> >> Signed-off-by: Fabio Estevam > > Board still works. I wonder you can compile it, because crm_regs.h is missing in novena_spl.c. I fix it myself, but I am wondering that it worked on your side. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================