[U-Boot] [PATCH 0/5] introduce sata stop

[Stefano Babic <sbabic@denx.de>]

On 21/11/2014 11:47, Nikita Kiryanov wrote:
> This series adds the sata stop command, which includes both cmd_sata code and
> driver support for resetting sata.
> A non-dummy reset_sata() is provided for dwc_ahsata, and a non-default
> sata_stop() is provided for cm_fx6.
> Finally, we use the new functionality to turn off sata on boot for mx6 devices.
> 
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> 
> Nikita Kiryanov (5):
>   arm: mx6: introduce disable_sata_clock
>   sata: implement reset_sata for dwc_ahsata
>   cmd_sata: implement sata stop command
>   arm: mx6: cm_fx6: implement board specific sata stop
>   arm: imx: stop sata on boot
> 
>  arch/arm/cpu/armv7/mx6/clock.c        |  8 ++++++++
>  arch/arm/cpu/armv7/omap-common/sata.c |  5 +++++
>  arch/arm/imx-common/cpu.c             |  8 ++++++--
>  arch/arm/include/asm/arch-mx6/clock.h |  1 +
>  board/compulab/cm_fx6/cm_fx6.c        | 12 +++++++++---
>  common/cmd_sata.c                     | 24 +++++++++++++++++++++++-
>  drivers/block/ata_piix.c              |  5 +++++
>  drivers/block/dwc_ahsata.c            | 21 +++++++++++++++++++++
>  drivers/block/fsl_sata.c              |  5 +++++
>  drivers/block/pata_bfin.c             |  5 +++++
>  drivers/block/sata_dwc.c              |  5 +++++
>  drivers/block/sata_sil.c              |  5 +++++
>  drivers/block/sata_sil3114.c          |  5 +++++
>  include/sata.h                        |  3 +++
>  14 files changed, 106 insertions(+), 6 deletions(-)
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================