[U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support

[York Sun <yorksun@freescale.com>]

On 11/25/2014 08:40 AM, Hu Mingkai-B21284 wrote:
> 
> 
>> -----Original Message-----
>> From: York Sun [mailto:yorksun at freescale.com]
>> Sent: Wednesday, November 26, 2014 12:22 AM
>> To: Hu Mingkai-B21284; u-boot at lists.denx.de
>> Cc: Sun York-R58495; Liu Po-B43644
>> Subject: Re: [PATCH] powerpc/c29xpcie: Add secure boot support
>>
>> On 11/25/2014 01:42 AM, Mingkai Hu wrote:
>>> From: Po Liu <Po.Liu@freescale.com>
>>>
>>> Add NOR and SPI flash secure boot target for C29XPCIE board.
>>>
>>> Signed-off-by: Po Liu <Po.Liu@freescale.com>
>>> Signed-off-by: Mingkai.Hu <Mingkai.Hu@freescale.com>
>>> ---
>>>  configs/C29XPCIE_NOR_SECBOOT_defconfig      | 4 ++++
>>>  configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 4 ++++
>>>  include/configs/C29XPCIE.h                  | 2 ++
>>>  3 files changed, 10 insertions(+)
>>>  create mode 100644 configs/C29XPCIE_NOR_SECBOOT_defconfig
>>>  create mode 100644 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
>>>
>>> diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig
>>> b/configs/C29XPCIE_NOR_SECBOOT_defconfig
>>> new file mode 100644
>>> index 0000000..86751cf
>>> --- /dev/null
>>> +++ b/configs/C29XPCIE_NOR_SECBOOT_defconfig
>>> @@ -0,0 +1,4 @@
>>> +CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT"
>>> +CONFIG_PPC=y
>>> +CONFIG_MPC85xx=y
>>> +CONFIG_TARGET_C29XPCIE=y
>>> diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
>>> b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
>>> new file mode 100644
>>> index 0000000..d1a42b2
>>> --- /dev/null
>>> +++ b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
>>> @@ -0,0 +1,4 @@
>>> +CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT"
>>> +CONFIG_PPC=y
>>> +CONFIG_MPC85xx=y
>>> +CONFIG_TARGET_C29XPCIE=y
>>> diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
>>> index 5d11278..1d8dce8 100644
>>> --- a/include/configs/C29XPCIE.h
>>> +++ b/include/configs/C29XPCIE.h
>>> @@ -579,4 +579,6 @@
>>>
>>>  #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
>>>
>>> +#include <asm/fsl_secure_boot.h>
>>> +
>>>  #endif	/* __CONFIG_H */
>>>
>>
>> Mingkai,
>>
>> I see you sent another patch by mistake. You should add a new version
>> number to this one because their subject are the same.
>>
>> Please update MAINTAINERS file when you add new targets.
>>
>> York
> Hi York,
> 
> I will sent version 2 patch.
> I didn't find target maintain info in the MAINTAINERS file, it is about sub module maintain info. Do we need to update the MAINTAINERS file for target update?
> 

All you need is to add the new defconfig in board/freescale/c29xpcie/MAINTAINERS.

York