From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 01 Dec 2014 10:36:12 +0100 Subject: [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data In-Reply-To: <1416839055-10404-1-git-send-email-fabio.estevam@freescale.com> References: <1416839055-10404-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <547C368C.6070400@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 24/11/2014 15:24, Fabio Estevam wrote: > Printing the calibration data on every boot does not provide really useful > information: > > U-Boot 2015.01-rc1-18266-ge7eb277 (Nov 24 2014 - 11:29:51) > > CPU: Freescale i.MX6Q rev1.2 at 792 MHz > CPU: Thermal calibration data: 0x5d85067d > CPU: Temperature 33 C > Reset cause: POR > Board: MX6-SabreSD > > Do not display the calibration data in order to have a cleaner boot log. > > Signed-off-by: Fabio Estevam > --- > drivers/thermal/imx_thermal.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index 1161585..0bd9cfd 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev) > if (fuse == 0 || fuse == ~0) { > printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); > return -EPERM; > - } else { > - printf("CPU: Thermal calibration data: 0x%x\n", fuse); > } > > *priv = fuse; > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================