* [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data
@ 2014-11-24 14:24 Fabio Estevam
2014-12-01 9:36 ` Stefano Babic
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2014-11-24 14:24 UTC (permalink / raw)
To: u-boot
Printing the calibration data on every boot does not provide really useful
information:
U-Boot 2015.01-rc1-18266-ge7eb277 (Nov 24 2014 - 11:29:51)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
CPU: Thermal calibration data: 0x5d85067d
CPU: Temperature 33 C
Reset cause: POR
Board: MX6-SabreSD
Do not display the calibration data in order to have a cleaner boot log.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
drivers/thermal/imx_thermal.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 1161585..0bd9cfd 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev)
if (fuse == 0 || fuse == ~0) {
printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
return -EPERM;
- } else {
- printf("CPU: Thermal calibration data: 0x%x\n", fuse);
}
*priv = fuse;
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data
2014-11-24 14:24 [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data Fabio Estevam
@ 2014-12-01 9:36 ` Stefano Babic
0 siblings, 0 replies; 2+ messages in thread
From: Stefano Babic @ 2014-12-01 9:36 UTC (permalink / raw)
To: u-boot
On 24/11/2014 15:24, Fabio Estevam wrote:
> Printing the calibration data on every boot does not provide really useful
> information:
>
> U-Boot 2015.01-rc1-18266-ge7eb277 (Nov 24 2014 - 11:29:51)
>
> CPU: Freescale i.MX6Q rev1.2 at 792 MHz
> CPU: Thermal calibration data: 0x5d85067d
> CPU: Temperature 33 C
> Reset cause: POR
> Board: MX6-SabreSD
>
> Do not display the calibration data in order to have a cleaner boot log.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> drivers/thermal/imx_thermal.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index 1161585..0bd9cfd 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev)
> if (fuse == 0 || fuse == ~0) {
> printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
> return -EPERM;
> - } else {
> - printf("CPU: Thermal calibration data: 0x%x\n", fuse);
> }
>
> *priv = fuse;
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-01 9:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-24 14:24 [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data Fabio Estevam
2014-12-01 9:36 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox