[U-Boot] [PATCH 2/2] mx6sxsabresd: Add thermal support

[Stefano Babic <sbabic@denx.de>]

On 25/11/2014 16:11, Fabio Estevam wrote:
> Add thermal support so that the temperature of the chip can be displayed on
> boot:
> 
> U-Boot 2015.01-rc1-18268-g1366c05-dirty (Nov 25 2014 - 13:02:42)                
>                                                                                 
> CPU:   Freescale i.MX6SX rev1.0 at 792 MHz                                      
> CPU:   Temperature 50 C                                                         
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  include/configs/mx6sxsabresd.h | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
> index d8ab291..5e0edab 100644
> --- a/include/configs/mx6sxsabresd.h
> +++ b/include/configs/mx6sxsabresd.h
> @@ -208,6 +208,16 @@
>  #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
>  #endif
>  
> +#define CONFIG_DM
> +#define CONFIG_DM_THERMAL
> +#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
> +#define CONFIG_IMX6_THERMAL
> +
> +#define CONFIG_CMD_FUSE
> +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
> +#define CONFIG_MXC_OCOTP
> +#endif
> +
>  /* FLASH and environment organization */
>  #define CONFIG_SYS_NO_FLASH
>  
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================