From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Fri, 5 Dec 2014 08:27:29 -0800 Subject: [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY In-Reply-To: <1415615549-5952-1-git-send-email-Shengzhou.Liu@freescale.com> References: <1415615549-5952-1-git-send-email-Shengzhou.Liu@freescale.com> Message-ID: <5481DCF1.8040401@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/10/2014 02:32 AM, Shengzhou Liu wrote: > Add support for Cortina CS4315/CS4340 10G PHY. > - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device > to initialize Cortina PHY. > - Cortina PHY has non-standard offset of PHY ID registers, thus > we define own get_phy_id() to override default get_phy_id(). > - To define macro CONFIG_PHY_CORTINA will enable this driver. > > Signed-off-by: Shengzhou Liu > --- > v7: reorder it in alphabetical order in Makefile > v6: polish it in phy.c and phy.h in alphabetical order > v5: fix unclaimed variable in case of nand boot. > v4: add support for loading cortina phy ucode from NAND/SPI/SD > v3: move devad as '0' in cortina.c instead of in phy.c > v2: no change. > Applied to u-boot-mpc85xx, awaiting upstream. York