* [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file
@ 2014-11-12 10:30 Shaveta Leekha
2014-12-05 16:33 ` York Sun
0 siblings, 1 reply; 3+ messages in thread
From: Shaveta Leekha @ 2014-11-12 10:30 UTC (permalink / raw)
To: u-boot
Add the support of newly added LC VCO SerDes protocols
for configuration of IDT and VSC crossbar
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Change-Id: I16ad23e2cbea3b0a232a153984d5126bc79ddd26
Reviewed-on: http://git.am.freescale.net:8181/23354
Tested-by: Yusong Sun <yorksun@freescale.com>
Reviewed-by: Yusong Sun <yorksun@freescale.com>
---
board/freescale/b4860qds/b4860qds.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index 975952f..7f2437e 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -385,15 +385,18 @@ int configure_vsc3316_3308(void)
}
break;
+ case 0x01:
case 0x02:
case 0x04:
case 0x05:
case 0x06:
+ case 0x07:
case 0x08:
case 0x09:
case 0x0A:
case 0x0B:
case 0x0C:
+ case 0x2F:
case 0x30:
case 0x32:
case 0x33:
@@ -494,10 +497,14 @@ int configure_vsc3316_3308(void)
case 0x9E:
case 0x9A:
case 0x98:
+ case 0xb1:
case 0xb2:
+ case 0x48:
case 0x49:
case 0x4E:
+ case 0x8C:
case 0x8D:
+ case 0x79:
case 0x7A:
num_vsc08_con = NUM_CON_VSC3308;
/* Configure VSC3308 crossbar switch */
@@ -730,19 +737,23 @@ int config_serdes1_refclks(void)
* to 122.88MHz
*/
switch (serdes1_prtcl) {
+ case 0x29:
case 0x2A:
case 0x2C:
case 0x2D:
case 0x2E:
+ case 0x01:
case 0x02:
case 0x04:
case 0x05:
case 0x06:
+ case 0x07:
case 0x08:
case 0x09:
case 0x0A:
case 0x0B:
case 0x0C:
+ case 0x2F:
case 0x30:
case 0x32:
case 0x33:
@@ -860,6 +871,8 @@ int config_serdes2_refclks(void)
#endif
case 0x9E:
case 0x9A:
+ /* fallthrough */
+ case 0xb1:
case 0xb2:
debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
serdes2_prtcl);
--
1.7.6.GIT
^ permalink raw reply related [flat|nested] 3+ messages in thread* [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420
@ 2014-11-12 10:10 Shaveta Leekha
2014-11-12 10:10 ` [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file Shaveta Leekha
0 siblings, 1 reply; 3+ messages in thread
From: Shaveta Leekha @ 2014-11-12 10:10 UTC (permalink / raw)
To: u-boot
Addded Alternate options with LC VCO for following protocols:
0x02 --> 0x01
0x08 --> 0x07
0x18 --> 0x17
0x1E --> 0x1D
0x49 --> 0x48
0x6F --> 0x6E
0x9A --> 0x99
0x9E --> 0x9D
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>i
Change-Id: Iefe14012ee897095f0198453d50f31096ca020e2
Reviewed-on: http://git.am.freescale.net:8181/23352
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Yusong Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/b4860_serdes.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
index cf18be5..63172de 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -18,6 +18,8 @@ struct serdes_config {
#ifdef CONFIG_PPC_B4860
static struct serdes_config serdes1_cfg_tbl[] = {
/* SerDes 1 */
+ {0x01, {AURORA, AURORA, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1} },
{0x02, {AURORA, AURORA, CPRI6, CPRI5,
CPRI4, CPRI3, CPRI2, CPRI1} },
{0x04, {AURORA, AURORA, CPRI6, CPRI5,
@@ -26,6 +28,8 @@ static struct serdes_config serdes1_cfg_tbl[] = {
CPRI4, CPRI3, CPRI2, CPRI1} },
{0x06, {AURORA, AURORA, CPRI6, CPRI5,
CPRI4, CPRI3, CPRI2, CPRI1} },
+ {0x07, {AURORA, AURORA, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1} },
{0x08, {AURORA, AURORA, CPRI6, CPRI5,
CPRI4, CPRI3, CPRI2, CPRI1} },
{0x09, {AURORA, AURORA, CPRI6, CPRI5,
@@ -184,12 +188,17 @@ static struct serdes_config serdes1_cfg_tbl[] = {
CPRI4, CPRI3, NONE, NONE} },
{0x0F, {NONE, NONE, CPRI6, CPRI5,
CPRI4, CPRI3, NONE, NONE} },
+ {0x17, {NONE, NONE,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ NONE, NONE, NONE, NONE} },
{0x18, {NONE, NONE,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
NONE, NONE, NONE, NONE} },
{0x1B, {NONE, NONE,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
NONE, NONE, NONE, NONE} },
+ {0x1D, {NONE, NONE, AURORA, AURORA,
+ NONE, NONE, NONE, NONE} },
{0x1E, {NONE, NONE, AURORA, AURORA,
NONE, NONE, NONE, NONE} },
{0x21, {NONE, NONE, AURORA, AURORA,
@@ -199,19 +208,29 @@ static struct serdes_config serdes1_cfg_tbl[] = {
{}
};
static struct serdes_config serdes2_cfg_tbl[] = {
+ {0x48, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ NONE, NONE, NONE, NONE} },
{0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, AURORA,
NONE, NONE, NONE, NONE} },
{0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, AURORA,
NONE, NONE, NONE, NONE} },
+ {0x6E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ AURORA, AURORA, NONE, NONE, NONE, NONE} },
{0x6F, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
AURORA, AURORA, NONE, NONE, NONE, NONE} },
{0x70, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
AURORA, AURORA, NONE, NONE, NONE, NONE} },
+ {0x99, {PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ NONE, NONE, NONE, NONE} },
{0x9A, {PCIE1, PCIE1,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
NONE, NONE, NONE, NONE} },
+ {0x9D, {PCIE1, PCIE1, PCIE1, PCIE1,
+ NONE, NONE, NONE, NONE} },
{0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
NONE, NONE, NONE, NONE} },
{}
--
1.7.6.GIT
^ permalink raw reply related [flat|nested] 3+ messages in thread* [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file
2014-11-12 10:10 [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420 Shaveta Leekha
@ 2014-11-12 10:10 ` Shaveta Leekha
0 siblings, 0 replies; 3+ messages in thread
From: Shaveta Leekha @ 2014-11-12 10:10 UTC (permalink / raw)
To: u-boot
Add the support of newly added LC VCO SerDes protocols
for configuration of IDT and VSC crossbar
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Change-Id: I16ad23e2cbea3b0a232a153984d5126bc79ddd26
Reviewed-on: http://git.am.freescale.net:8181/23354
Tested-by: Yusong Sun <yorksun@freescale.com>
Reviewed-by: Yusong Sun <yorksun@freescale.com>
---
board/freescale/b4860qds/b4860qds.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index 975952f..7f2437e 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -385,15 +385,18 @@ int configure_vsc3316_3308(void)
}
break;
+ case 0x01:
case 0x02:
case 0x04:
case 0x05:
case 0x06:
+ case 0x07:
case 0x08:
case 0x09:
case 0x0A:
case 0x0B:
case 0x0C:
+ case 0x2F:
case 0x30:
case 0x32:
case 0x33:
@@ -494,10 +497,14 @@ int configure_vsc3316_3308(void)
case 0x9E:
case 0x9A:
case 0x98:
+ case 0xb1:
case 0xb2:
+ case 0x48:
case 0x49:
case 0x4E:
+ case 0x8C:
case 0x8D:
+ case 0x79:
case 0x7A:
num_vsc08_con = NUM_CON_VSC3308;
/* Configure VSC3308 crossbar switch */
@@ -730,19 +737,23 @@ int config_serdes1_refclks(void)
* to 122.88MHz
*/
switch (serdes1_prtcl) {
+ case 0x29:
case 0x2A:
case 0x2C:
case 0x2D:
case 0x2E:
+ case 0x01:
case 0x02:
case 0x04:
case 0x05:
case 0x06:
+ case 0x07:
case 0x08:
case 0x09:
case 0x0A:
case 0x0B:
case 0x0C:
+ case 0x2F:
case 0x30:
case 0x32:
case 0x33:
@@ -860,6 +871,8 @@ int config_serdes2_refclks(void)
#endif
case 0x9E:
case 0x9A:
+ /* fallthrough */
+ case 0xb1:
case 0xb2:
debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
serdes2_prtcl);
--
1.7.6.GIT
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-12-05 16:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-12 10:30 [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file Shaveta Leekha
2014-12-05 16:33 ` York Sun
-- strict thread matches above, loose matches on Subject: below --
2014-11-12 10:10 [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420 Shaveta Leekha
2014-11-12 10:10 ` [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file Shaveta Leekha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox