From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board
Date: Fri, 5 Dec 2014 10:10:49 -0800 [thread overview]
Message-ID: <5481F529.6090605@freescale.com> (raw)
In-Reply-To: <1417590049-500-10-git-send-email-b18965@freescale.com>
On 12/02/2014 11:00 PM, Alison Wang wrote:
> This patch adds NAND boot support for LS1021AQDS board. SPL
> framework is used. PBL initialize the internal RAM and copy
> SPL to it, then SPL initialize DDR using SPD and copy u-boot
> from NAND flash to DDR, finally SPL transfer control to u-boot.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> Signed-off-by: Alison Wang <alison.wang@freescale.com>
> ---
> Change log:
> v4: Use some defines instead of the magic numbers.
> v3: New file.
>
> arch/arm/include/asm/arch-ls102xa/config.h | 1 +
> arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 +
> board/freescale/ls1021aqds/MAINTAINERS | 1 +
> board/freescale/ls1021aqds/ls1021aqds.c | 16 ++++++
> board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++
> configs/ls1021aqds_nand_defconfig | 4 ++
> drivers/mtd/nand/fsl_ifc_spl.c | 8 +++
> include/configs/ls1021aqds.h | 68 +++++++++++++++++++++++
> 8 files changed, 107 insertions(+)
> create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
> create mode 100644 configs/ls1021aqds_nand_defconfig
>
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
> index a500b5b..da7537c 100644
> --- a/arch/arm/include/asm/arch-ls102xa/config.h
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -13,6 +13,7 @@
> #define OCRAM_SIZE 0x00020000
>
> #define CONFIG_SYS_IMMR 0x01000000
> arch/arm/include/asm/arch-ls102xa/config.h | 1 +
> arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 5 ++
> board/freescale/ls1021aqds/MAINTAINERS | 1 +
> board/freescale/ls1021aqds/ls1021aqds.c | 16 +++++
> board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++
> configs/ls1021aqds_nand_defconfig | 4 ++
> drivers/mtd/nand/fsl_ifc_spl.c | 10 ++++
> include/configs/ls1021aqds.h | 72 +++++++++++++++++++++++
> 8 files changed, 116 insertions(+)
> create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
> create mode 100644 configs/ls1021aqds_nand_defconfig
The above lines are not supposed to be here.
>
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
> index ba86eea..8318c91 100644
> --- a/arch/arm/include/asm/arch-ls102xa/config.h
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -13,6 +13,7 @@
> #define OCRAM_SIZE 0x00020000
>
> #define CONFIG_SYS_IMMR 0x01000000
> +#define CONFIG_SYS_DCSRBAR 0x20200000
>
> #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
> #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
Alison,
This patch is corrupted. Please re-generate (this patch only).
York
next prev parent reply other threads:[~2014-12-05 18:10 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-03 7:00 [U-Boot] [PATCH v4 0/9] Add SD/NAND boot support for LS1021AQDS/TWR board Alison Wang
2014-12-03 7:00 ` [U-Boot] [PATCH v4 1/9] ls102xa: pblimage: Add pblimage tool support for LS102xA Alison Wang
2014-12-11 19:01 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 2/9] spl: Use u-boot.img instead of u-boot.bin Alison Wang
2014-12-11 19:01 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 3/9] arm: spl: Add I2C linker list in generic .lds Alison Wang
2014-12-11 19:02 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 4/9] common: spl: Add interactive DDR debugger support for SPL image Alison Wang
2014-12-05 16:40 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 5/9] kconfig: ls1021a: add SUPPORT_SPL Alison Wang
2014-12-03 7:30 ` Masahiro Yamada
2014-12-03 7:53 ` Huan Wang
2014-12-11 19:02 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 6/9] ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro Alison Wang
2014-12-11 19:03 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 7/9] arm: ls102xa: Add SD boot support for LS1021AQDS board Alison Wang
2014-12-11 19:03 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 8/9] arm: ls102xa: Add SD boot support for LS1021ATWR board Alison Wang
2014-12-11 19:04 ` York Sun
2014-12-03 7:00 ` [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board Alison Wang
2014-12-05 18:10 ` York Sun [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-12-06 14:46 Alison Wang
2014-12-08 20:53 ` York Sun
2014-12-09 2:30 ` chenhui.zhao at freescale.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5481F529.6090605@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox