From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Fri, 5 Dec 2014 10:10:49 -0800 Subject: [U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board In-Reply-To: <1417590049-500-10-git-send-email-b18965@freescale.com> References: <1417590049-500-1-git-send-email-b18965@freescale.com> <1417590049-500-10-git-send-email-b18965@freescale.com> Message-ID: <5481F529.6090605@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 12/02/2014 11:00 PM, Alison Wang wrote: > This patch adds NAND boot support for LS1021AQDS board. SPL > framework is used. PBL initialize the internal RAM and copy > SPL to it, then SPL initialize DDR using SPD and copy u-boot > from NAND flash to DDR, finally SPL transfer control to u-boot. > > Signed-off-by: Prabhakar Kushwaha > Signed-off-by: Alison Wang > --- > Change log: > v4: Use some defines instead of the magic numbers. > v3: New file. > > arch/arm/include/asm/arch-ls102xa/config.h | 1 + > arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 + > board/freescale/ls1021aqds/MAINTAINERS | 1 + > board/freescale/ls1021aqds/ls1021aqds.c | 16 ++++++ > board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++ > configs/ls1021aqds_nand_defconfig | 4 ++ > drivers/mtd/nand/fsl_ifc_spl.c | 8 +++ > include/configs/ls1021aqds.h | 68 +++++++++++++++++++++++ > 8 files changed, 107 insertions(+) > create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg > create mode 100644 configs/ls1021aqds_nand_defconfig > > diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h > index a500b5b..da7537c 100644 > --- a/arch/arm/include/asm/arch-ls102xa/config.h > +++ b/arch/arm/include/asm/arch-ls102xa/config.h > @@ -13,6 +13,7 @@ > #define OCRAM_SIZE 0x00020000 > > #define CONFIG_SYS_IMMR 0x01000000 > arch/arm/include/asm/arch-ls102xa/config.h | 1 + > arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 5 ++ > board/freescale/ls1021aqds/MAINTAINERS | 1 + > board/freescale/ls1021aqds/ls1021aqds.c | 16 +++++ > board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++ > configs/ls1021aqds_nand_defconfig | 4 ++ > drivers/mtd/nand/fsl_ifc_spl.c | 10 ++++ > include/configs/ls1021aqds.h | 72 +++++++++++++++++++++++ > 8 files changed, 116 insertions(+) > create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg > create mode 100644 configs/ls1021aqds_nand_defconfig The above lines are not supposed to be here. > > diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h > index ba86eea..8318c91 100644 > --- a/arch/arm/include/asm/arch-ls102xa/config.h > +++ b/arch/arm/include/asm/arch-ls102xa/config.h > @@ -13,6 +13,7 @@ > #define OCRAM_SIZE 0x00020000 > > #define CONFIG_SYS_IMMR 0x01000000 > +#define CONFIG_SYS_DCSRBAR 0x20200000 > > #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) > #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) Alison, This patch is corrupted. Please re-generate (this patch only). York