From: Bo Shen <voice.shen@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support
Date: Thu, 11 Dec 2014 09:29:14 +0800 [thread overview]
Message-ID: <5488F36A.4000203@atmel.com> (raw)
In-Reply-To: <5488F192.20702@atmel.com>
Hi Robert Nelson,
On 12/11/2014 09:21 AM, Bo Shen wrote:
> Hi Robert Nelson,
>
> On 12/11/2014 05:35 AM, Robert Nelson wrote:
>>> +
>>> >+#ifdef CONFIG_SYS_USE_MMC
>>> >+#define CONFIG_SPL_LDSCRIPT
>>> arch/arm/cpu/at91-common/u-boot-spl.lds
>>> >+#define CONFIG_SPL_MMC_SUPPORT
>>> >+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
>>> >+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
>>> >+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
>> Hi Bo,
>>
>> You have an extra "_" there: (MMC_SD) -> (MMCSD), it should be:
>>
>> #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
>>
>> build error:
>>
>> common/spl/spl_mmc.c: In function ?spl_mmc_load_image?:
>> common/spl/spl_mmc.c:135:6: error:
>> ?CONFIG_SYS_MMCSD_FS_BOOT_PARTITION? undeclared (first use in this
>> function)
>> CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
>> ^
>> common/spl/spl_mmc.c:135:6: note: each undeclared identifier is
>> reported only once for each function it appears in
>> scripts/Makefile.build:275: recipe for target
>> 'spl/common/spl/spl_mmc.o' failed
>> make[2]: *** [spl/common/spl/spl_mmc.o] Error 1
>> scripts/Makefile.spl:212: recipe for target 'spl/common/spl' failed
>> make[1]: *** [spl/common/spl] Error 2
>> make[1]: *** Waiting for unfinished jobs....
>
> Do you test this patch series based on u-boot master branch?
> I use "git grep CONFIG_SYS_MMCSD_FS_BOOT_PARTITION", and don't find any
> information about it.
>
> Using "git grep CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION" show many files use
> it. And the following commit introduced this name:
> --->8---
> commit 205b4f33cfe58268df7d433f2da515fe660afd9c
> Author: Guillaume GARDET <guillaume.gardet@free.fr>
> Date: Wed Oct 15 17:53:11 2014 +0200
>
> Rename some defines containing FAT in their name to be filesystem
> generic
>
> Rename some defines containing FAT in their name to be filesystem
> generic:
> MMCSD_MODE_FAT => MMCSD_MODE_FS
> CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME
> CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
> CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION =>
> CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
>
> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
> Cc: Tom Rini <trini@ti.com>
> ---8<---
Sorry for the noise, just now, I fetch the u-boot master branch and find
this name is changed again in the following commit:
--->8---
commit e2ccdf89a0196b40b445700670777ebee231756d
Author: Paul Kocialkowski <contact@paulk.fr>
Date: Sat Nov 8 23:14:55 2014 +0100
MMC SD fs boot partition config coding style and proper description
CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other
config
options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR.
In addition, it is not related to raw mode booting but to fs mode
instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
---8<---
Thanks, I will rebase it to u-boot latest master branch and will fix it
in v2 version.
Thanks again.
Best Regards,
Bo Shen
next prev parent reply other threads:[~2014-12-11 1:29 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-08 6:09 [U-Boot] [PATCH 0/13] ARM: atmel: enable spl for sama5d4 related boards Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 01/13] ARM: atmel: clock: make it possible to configure HMX32 Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 02/13] ARM: atmel: sama5: add bus matrix header file Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 03/13] ARM: atmel: sama5: add sfr register " Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 04/13] ARM: atmel: spl: add weak bus matrix init function Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 05/13] ARM: atmel: spl: add saic to aic redirect function Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 06/13] ARM: atmel: spl: can not disable osc for sama5d4 Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 07/13] ARM: atmel: sama5d4: add matrix1 base addr definition Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 08/13] ARM: atmel: sama5d4: add bus matrix init function Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 09/13] ARM: atmel: sama5d4: add interrupt redirec function Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 10/13] ARM: atmel: sama5d4: can access DDR in interleave mode Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 11/13] ARM: atmel: sama5d4: build related file when enable SPL Bo Shen
2014-12-08 6:09 ` [U-Boot] [PATCH 12/13] ARM: atmel: sama5d4ek: enable SPL support Bo Shen
2014-12-10 21:38 ` Robert Nelson
2014-12-08 6:09 ` [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support Bo Shen
2014-12-10 21:35 ` Robert Nelson
2014-12-11 1:21 ` Bo Shen
2014-12-11 1:29 ` Bo Shen [this message]
2014-12-11 1:56 ` Robert Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5488F36A.4000203@atmel.com \
--to=voice.shen@atmel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox