From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-fsl-qoriq.git master
Date: Thu, 11 Dec 2014 10:52:00 -0800 [thread overview]
Message-ID: <5489E7D0.7090108@freescale.com> (raw)
Tom,
The following changes since commit 32fdf0e4d82bdca5d64d86330e461e59685f9959:
Prepare v2015.01-rc3 (2014-12-08 16:35:08 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 0de15707a71ec64dbc1ead2831457f1550179ea7:
kconfig: ls102xa: Change the prompt messages (2014-12-11 09:42:41 -0800)
----------------------------------------------------------------
Alison Wang (12):
ls102xa: pblimage: Add pblimage tool support for LS102xA
spl: Use u-boot.img instead of u-boot.bin
arm: spl: Add I2C linker list in generic .lds
kconfig: ls1021a: add SUPPORT_SPL
ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro
arm: ls102xa: Add SD boot support for LS1021AQDS board
arm: ls102xa: Add SD boot support for LS1021ATWR board
arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support
arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support
arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
arm: ls102xa: Add NAND boot support for LS1021AQDS board
kconfig: ls102xa: Change the prompt messages
Chenhui Zhao (1):
ls1021aqds: set the default I2C channel before DDR init
Jaiprakash Singh (1):
driver/mtd: Fix IFC compilation warnings
Minghuan Lian (1):
arm: ls102xa: Update PCIe dts node status
Nikhil Badola (3):
drivers: usb: Make usb device-tree fixup code architecture independent
drivers: usb: fsl: Add USB device-tree errata framework
drivers: usb: fsl: Check USB Erratum A007792 applicability
Tang Yuantian (2):
arm: ls102xa: fixed a bus frequency setting error
fsl/sleep: updated the deep sleep framework for QorIQ platforms
Xiubo Li (6):
ARM: HYP/non-sec: add the pen address BE mode support.
ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
ls1021a: adding a secondary core boot address and kick functions
ls102xa: changing a few targets' configurations.
ARM: ls102xa: allow all the peripheral access permission as R/W.
ARM: ls102xa: Setting device's stream id for SMMUs.
Yao Yuan (1):
ls1021aqds: add hwconfig setting to do pin mux
chenhui zhao (1):
arm: ls102xa: clear EPU registers for deep sleep
Makefile | 11 +-
arch/arm/Kconfig | 6 +-
arch/arm/cpu/armv7/ls102xa/Makefile | 2 +
arch/arm/cpu/armv7/ls102xa/cpu.c | 34 +++
arch/arm/cpu/armv7/ls102xa/fdt.c | 2 +-
arch/arm/cpu/armv7/ls102xa/fsl_epu.c | 57 ++++
arch/arm/cpu/armv7/ls102xa/fsl_epu.h | 68 +++++
arch/arm/cpu/armv7/ls102xa/spl.c | 33 +++
arch/arm/cpu/armv7/nonsec_virt.S | 7 +-
arch/arm/cpu/u-boot-spl.lds | 3 +
arch/arm/include/asm/arch-ls102xa/config.h | 9 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 9 +
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 17 ++
arch/arm/include/asm/arch-ls102xa/ns_access.h | 118 ++++++++
arch/arm/include/asm/arch-ls102xa/spl.h | 20 ++
arch/arm/include/asm/pcie_layerscape.h | 13 +
arch/powerpc/cpu/mpc8xxx/fdt.c | 104 -------
board/freescale/common/Makefile | 10 +
board/freescale/common/arm_sleep.c | 95 +++++++
board/freescale/common/ls102xa_stream_id.c | 18 ++
board/freescale/common/mpc85xx_sleep.c | 88 ++++++
board/freescale/common/ns_access.c | 30 +++
board/freescale/common/qixis.h | 7 +
board/freescale/common/sleep.h | 21 ++
board/freescale/ls1021aqds/MAINTAINERS | 3 +
board/freescale/ls1021aqds/ddr.c | 5 +-
board/freescale/ls1021aqds/ls1021aqds.c | 283 ++++++++++++++++++--
board/freescale/ls1021aqds/ls102xa_pbi.cfg | 12 +
board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +
board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg | 14 +
board/freescale/ls1021atwr/MAINTAINERS | 2 +
board/freescale/ls1021atwr/ls1021atwr.c | 151 +++++++++++
board/freescale/ls1021atwr/ls102xa_pbi.cfg | 12 +
board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 14 +
configs/ls1021aqds_nand_defconfig | 4 +
configs/ls1021aqds_qspi_defconfig | 3 +
configs/ls1021aqds_sdcard_defconfig | 4 +
configs/ls1021atwr_qspi_defconfig | 3 +
configs/ls1021atwr_sdcard_defconfig | 4 +
drivers/ddr/fsl/arm_ddr_gen3.c | 45 +++-
drivers/ddr/fsl/fsl_ddr_gen4.c | 44 ++-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 67 ++---
drivers/mtd/nand/fsl_ifc_nand.c | 2 +-
drivers/mtd/nand/fsl_ifc_spl.c | 10 +
drivers/pci/Makefile | 1 +
drivers/pci/pcie_layerscape.c | 51 ++++
drivers/usb/host/ehci-fsl.c | 186 +++++++++++++
include/configs/ls1021aqds.h | 175 +++++++++++-
include/configs/ls1021atwr.h | 95 ++++++-
include/configs/sun7i.h | 1 +
include/fsl_ddr_sdram.h | 12 +-
include/fsl_usb.h | 23 ++
tools/pblimage.c | 110 +++++---
53 files changed, 1904 insertions(+), 221 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_epu.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_epu.h
create mode 100644 arch/arm/cpu/armv7/ls102xa/spl.c
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/ns_access.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/spl.h
create mode 100644 arch/arm/include/asm/pcie_layerscape.h
create mode 100644 board/freescale/common/arm_sleep.c
create mode 100644 board/freescale/common/ls102xa_stream_id.c
create mode 100644 board/freescale/common/mpc85xx_sleep.c
create mode 100644 board/freescale/common/ns_access.c
create mode 100644 board/freescale/common/sleep.h
create mode 100644 board/freescale/ls1021aqds/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
create mode 100644 configs/ls1021aqds_nand_defconfig
create mode 100644 configs/ls1021aqds_qspi_defconfig
create mode 100644 configs/ls1021aqds_sdcard_defconfig
create mode 100644 configs/ls1021atwr_qspi_defconfig
create mode 100644 configs/ls1021atwr_sdcard_defconfig
create mode 100644 drivers/pci/pcie_layerscape.c
Thanks.
York
next reply other threads:[~2014-12-11 18:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-11 18:52 York Sun [this message]
2014-12-11 19:15 ` [U-Boot] Please pull u-boot-fsl-qoriq.git master York Sun
-- strict thread matches above, loose matches on Subject: below --
2014-12-11 20:41 York Sun
2014-12-12 1:33 ` Tom Rini
2016-01-27 17:30 york sun
2016-01-28 23:18 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5489E7D0.7090108@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox