[U-Boot] [PATCH] mtd: nand: revive "nand scrub" command

[Heiko Schocher <hs@denx.de>]

Hello Scott,

Am 16.12.2014 07:24, schrieb Scott Wood:
> On Tue, 2014-12-16 at 07:21 +0100, Heiko Schocher wrote:
>> Hello Tom, Scott,
>>
>> Am 16.12.2014 02:26, schrieb Tom Rini:
>>> As we're neck deep in "See? Scott was right" I'm inclined to go with
>>> what Scott is saying.  We tried it, it actively didn't work, lets step
>>> back, evaluate and move along.
>>
>> Ok, I have no objections against that, it was just my point of view ...
>>
>> And yes, I missed here and there some pieces when syncing with
>> linux 3.14 ... sorry for that, but I could not test every scenario for
>> every board ... and we had no clean base for using git, which at last
>> in my attempt ended in a big mess when syncing with linux ... so I started
>> more or less from scratch ...
>
> I understand that for some of the mtd parts, but the nand code did have
> a relatively clean base.

Yes, the problem was in the mtd and most notably in the ubi/ubifs code,
IIRC.

>> So ...
>>
>> Who will send a "delete ifdef" patch?
>
> I will.

Thanks!

>
>> Who will test, how a resync with linux (saying 3.17 ?) work now with git?
>>
>> If this test is done, we can decide, which way is the "way to go" ... ?
>
> I'll try a 3.18 sync soon.

Thanks! Please add a little description how you did the resync.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany