* [U-Boot] Booting imx6 board via USB-OTG and SPL
@ 2014-12-16 22:51 Nikolay Dimitrov
0 siblings, 0 replies; only message in thread
From: Nikolay Dimitrov @ 2014-12-16 22:51 UTC (permalink / raw)
To: u-boot
Hi guys,
When booting a fresh imx6 board via USB-OTG, the SPL is kinda useless
for bootstrapping my board when the SPI NOR is empty and u-boot.img
payload is not available.
I currently use a non-SPL U-Boot to prepare my boards after
manufacturing (write fuses & SPI NOR), but do you see a better way to
boot SPL+u-boot.img via OTG?
The reason I'm asking this is that I'm currently using a SPL-enabled
U-Boot as the production boot-loader, and having to support 2 versions
is non-optimal, so I'm looking for a better solution.
Thanks in advance. Regards,
Nikolay
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-12-16 22:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-16 22:51 [U-Boot] Booting imx6 board via USB-OTG and SPL Nikolay Dimitrov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox