public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: drEagle <dreagle@doukki.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time
Date: Wed, 17 Dec 2014 10:22:33 +0100	[thread overview]
Message-ID: <54914B59.2080808@doukki.net> (raw)
In-Reply-To: <CAAwVp3u2pb_aaY9hf_gP9k1z7z3-ACR7Tnq=UHBoN5cdzeU=-A@mail.gmail.com>

Hi,

Any chance to be included in the next release of u-boot ?

Regards,
G?rald

Le 15/12/2014 12:14, Mario Schuknecht a ?crit :
> 
> 2014-12-13 21:35 GMT+01:00 G?rald Kerma <drEagle at doukki.net <mailto:drEagle@doukki.net>>:
> 
> 
>     This serie of patches speed up access time of MVEBUMMC driver
> 
>     This is allowed by a fix in MVEBUMMC init status check inspired from linux MVSDIO driver.
>              * Hardware weirdness.  The FIFO_EMPTY bit of the HW_STATE
>              * register is sometimes not set before a while when some
>              * "unusual" data block sizes are used (such as with the SWITCH
>              * command), even despite the fact that the XFER_DONE interrupt
>              * was raised.  And if another data transfer starts before
>              * this bit comes to good sense (which eventually happens by
>              * itself) then the new transfer simply fails with a timeout.
> 
>     It allows about 10x to 40x faster access time transfer on SHEEVAPLUG MMC
>     It may also fixes some SD types incompatibilities
> 
>     ### before patch
> 
>     Marvell>> ext2load mmc 0:1 0x800000 uImage
>     1613392 bytes read in 977 ms (1.6 MiB/s)
> 
>     ### with fix
> 
>     Marvell>> ext2load mmc 0:1 0x800000 uImage
>     1613392 bytes read in 83 ms (18.5 MiB/s)
> 
> 
> 
> Looks good to me.
> ACK to this series of patches:
>  
> 
>     G?rald Kerma (6):
>       MVEBUMMC : Change copyright date
>       MVEBUMMC : Speed up access time
>       MVEBUMMC : FIX debug strings
>       MVEBUMMC : REMOVE unnecessary delays
>       MVEBUMMC : CLEAN code
>       MVEBUMMC : REMOVE unnecessary delay from init
> 
> 
>      drivers/mmc/mvebu_mmc.c | 103 ++++++++++++++++++++++++++++--------------------
>      include/mvebu_mmc.h     |   1 +
>      2 files changed, 61 insertions(+), 43 deletions(-)
> 
>     --
>     2.1.3
>     _______________________________________________
>     U-Boot mailing list
>     U-Boot at lists.denx.de <mailto:U-Boot@lists.denx.de>
>     http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

  reply	other threads:[~2014-12-17  9:22 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-04 15:03 [U-Boot] [PATCH v2 1/1] ARM: kirkwood: mvebu_mmc: Speed up access time Gérald Kerma
2014-12-13 20:35 ` [U-Boot] [PATCH v3 0/6] " Gérald Kerma
2014-12-13 20:35   ` [U-Boot] [PATCH v3 1/6] MVEBUMMC : Change copyright date Gérald Kerma
2015-01-05 18:25     ` Pantelis Antoniou
2014-12-13 20:35   ` [U-Boot] [PATCH v3 2/6] MVEBUMMC : Speed up access time Gérald Kerma
2015-01-05 18:26     ` Pantelis Antoniou
2014-12-13 20:35   ` [U-Boot] [PATCH v3 3/6] MVEBUMMC : FIX debug strings Gérald Kerma
2015-01-05 18:27     ` Pantelis Antoniou
2014-12-13 20:35   ` [U-Boot] [PATCH v3 4/6] MVEBUMMC : REMOVE unnecessary delays Gérald Kerma
2015-01-05 18:28     ` Pantelis Antoniou
2014-12-13 20:35   ` [U-Boot] [PATCH v3 5/6] MVEBUMMC : CLEAN code Gérald Kerma
2015-01-05 18:30     ` Pantelis Antoniou
2014-12-13 20:35   ` [U-Boot] [PATCH v3 6/6] MVEBUMMC : REMOVE unnecessary delay from init Gérald Kerma
2015-01-05 18:32     ` Pantelis Antoniou
2014-12-15 11:14   ` [U-Boot] [PATCH v3 0/6] ARM: kirkwood: mvebu_mmc: Speed up access time Mario Schuknecht
2014-12-17  9:22     ` drEagle [this message]
2014-12-17 10:18       ` Pantelis Antoniou
2014-12-23 13:01         ` drEagle
2015-01-03 16:06           ` drEagle
2015-01-05 18:31             ` Pantelis Antoniou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54914B59.2080808@doukki.net \
    --to=dreagle@doukki.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox