public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters to clock_set_pll5()
Date: Fri, 19 Dec 2014 17:40:27 +0100	[thread overview]
Message-ID: <549454FB.4060502@redhat.com> (raw)
In-Reply-To: <20141219120300.2740b997@i7>

Hi,

On 19-12-14 11:03, Siarhei Siamashka wrote:
> On Tue, 16 Dec 2014 21:31:34 +0100
> Hans de Goede <hdegoede@redhat.com> wrote:
>
>> The A23 (sun8i) requires different values for these then sun6i, so make them
>> function parameters.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> What happens if A23 does not get these special k and m parameters, but
> the 'clock_set_pll5' function picks some other values for them (with
> the same resulting target clock speed)?

The major difference is that on the A23 pll5 must be set to dram_clk / 2,
where as on A31 it needs to be set to dram_clk * 2. By codifying k and m
so that they do the * 2 on A31 and / 2 on A23 we can make any multiple of
24 MHz as DRAM clk without needing any other code to figure out the optimal
k and m. AFAIK using other k and m factors with the same end-result should
work fine. But doing things this way follows the KISS principle and I'm
a great fan of KISS.

Regards,

Hans



>
> And if they are really required for A23, then why exposing them as the
> function arguments instead of hiding this implementation detail inside
> of the 'clock_set_pll5' function?
>
>> ---
>>   arch/arm/cpu/armv7/sunxi/clock_sun6i.c        | 4 +---
>>   arch/arm/cpu/armv7/sunxi/dram_sun6i.c         | 2 +-
>>   arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 2 +-
>>   3 files changed, 3 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
>> index 193e314..8ef19df 100644
>> --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
>> +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
>> @@ -144,12 +144,10 @@ void clock_set_pll3(unsigned int clk)
>>   	       &ccm->pll3_cfg);
>>   }
>>
>> -void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
>> +void clock_set_pll5(unsigned int clk, int k, int m, bool sigma_delta_enable)
>>   {
>>   	struct sunxi_ccm_reg * const ccm =
>>   		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>> -	const int k = 2;
>> -	const int m = 1;
>>
>>   	if (sigma_delta_enable)
>>   		writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg);
>> diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c
>> index bc6428a..a8bbdfd 100644
>> --- a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c
>> +++ b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c
>> @@ -46,7 +46,7 @@ static void mctl_sys_init(void)
>>   		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>>   	const int dram_clk_div = 2;
>>
>> -	clock_set_pll5(DRAM_CLK * dram_clk_div, false);
>> +	clock_set_pll5(DRAM_CLK * dram_clk_div, 2, 1, false);
>>
>>   	clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK,
>>   		CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST |
>> diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
>> index f807af3..7d61216 100644
>> --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
>> +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
>> @@ -311,6 +311,6 @@ struct sunxi_ccm_reg {
>>   #define CCM_DE_CTRL_PLL10		(5 << 24)
>>   #define CCM_DE_CTRL_GATE		(1 << 31)
>>
>> -void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
>> +void clock_set_pll5(unsigned int clk, int k, int m, bool sigma_delta_enable);
>>
>>   #endif /* _SUNXI_CLOCK_SUN6I_H */
>
>
>

  reply	other threads:[~2014-12-19 16:40 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-16 20:31 [U-Boot] [PATCH 01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/ Hans de Goede
2014-12-16 20:31 ` [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus) Hans de Goede
2014-12-17  2:22   ` Chen-Yu Tsai
2014-12-17 12:56     ` Hans de Goede
2014-12-18 18:57       ` Ian Campbell
2014-12-18 18:59       ` Ian Campbell
2014-12-19 15:26         ` Hans de Goede
2014-12-16 20:31 ` [U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support Hans de Goede
2014-12-17  2:34   ` Chen-Yu Tsai
2014-12-18 10:44     ` Hans de Goede
2014-12-18 19:00   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 04/14] sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage Hans de Goede
2014-12-18 19:02   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 05/14] sunxi: axp221: Make dcdc1 voltage configurable Hans de Goede
2014-12-18 19:03   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 06/14] sunxi: axp221: Explicitly turn off unused voltages Hans de Goede
2014-12-18 19:04   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 07/14] sunxi: axp221: Disable dcdc4 on sun8i (A23) Hans de Goede
2014-12-18 19:05   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 08/14] sun6i: Add a sigma_delta_enable paramter to clock_set_pll5() Hans de Goede
2014-12-18 19:07   ` Ian Campbell
2014-12-19 10:02   ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters " Hans de Goede
2014-12-18 19:07   ` Ian Campbell
2014-12-19 10:03   ` Siarhei Siamashka
2014-12-19 16:40     ` Hans de Goede [this message]
2014-12-22  7:25       ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h Hans de Goede
2014-12-18 19:08   ` Ian Campbell
2014-12-19 10:06   ` Siarhei Siamashka
2014-12-19 16:42     ` Hans de Goede
2014-12-22  7:28       ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i Hans de Goede
2014-12-18 19:12   ` Ian Campbell
2014-12-19 10:08     ` Siarhei Siamashka
2014-12-19 16:56       ` Hans de Goede
2014-12-22  7:39         ` Siarhei Siamashka
2014-12-19 16:55     ` Hans de Goede
2014-12-22 14:19       ` Ian Campbell
2014-12-22 14:32         ` Siarhei Siamashka
2014-12-22 14:34           ` Ian Campbell
2014-12-22 15:47         ` Hans de Goede
2014-12-16 20:31 ` [U-Boot] [PATCH 12/14] sunxi: Use memcmp for mctl_mem_matches Hans de Goede
2014-12-18 19:13   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support Hans de Goede
2014-12-18 11:12   ` Chen-Yu Tsai
2014-12-18 19:17   ` Ian Campbell
2014-12-19 16:51     ` Hans de Goede
2014-12-19 10:20   ` Siarhei Siamashka
2014-12-19 17:05     ` Hans de Goede
2014-12-22  7:43       ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 14/14] sun8i: Add defconfig for Ippo_q8h v1.2 Hans de Goede
2014-12-18 19:19   ` Ian Campbell
2014-12-18 18:56 ` [U-Boot] [PATCH 01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/ Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=549454FB.4060502@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox