public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h
Date: Fri, 19 Dec 2014 17:42:58 +0100	[thread overview]
Message-ID: <54945592.5010902@redhat.com> (raw)
In-Reply-To: <20141219120624.6aac3a0b@i7>

Hi,

On 19-12-14 11:06, Siarhei Siamashka wrote:
> On Tue, 16 Dec 2014 21:31:35 +0100
> Hans de Goede <hdegoede@redhat.com> wrote:
>
>> The await_completion helper is already copy pasted between the sun4i and sun6i
>> dram code, and we need it for sun8i too, so lets make it an inline helper in
>> dram.h, rather then adding yet another copy.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Making this function "static inline" and placing it into a header file
> encourages the compiler to actually inline it. Which is not great for
> code size:
>
>
> == Before the patch and using gcc version 4.8.3 ==
>
> $ arm-none-linux-gnieabi-size spl/arch/arm/cpu/armv7/sunxi/dram_sun4i.o
>   text    data     bss     dec     hex filename
>   1731       0       0    1731     6c3
>
> $ arm-none-linux-gnieabi-size spl/arch/arm/cpu/armv7/sunxi/dram_sun6i.o
>   text    data     bss     dec     hex filename
>   1841       0       0    1841     731
>
> == After the patch and using gcc version 4.8.3 ==
>
> $ arm-none-linux-gnieabi-size spl/arch/arm/cpu/armv7/sunxi/dram_sun4i.o
>   text    data     bss     dec     hex filename
>   1763       0       0    1763     6e3
>
> $ arm-none-linux-gnieabi-size spl/arch/arm/cpu/armv7/sunxi/dram_sun6i.o
>   text    data     bss     dec     hex filename
>   1983       0       0    1983     7bf

Ah, thanks for catching that, the size increase does not seem to be a problem
right now, but it certainly is something to keep in mind.

> Could we perhaps just introduce something like a new source file
> "dram_common.c" or even "dram.c"?

Sounds like a good idea, patches welcome.

> As an additional observation, moving await_bits_clear/await_bits_set
> functions into a common header file and using them in the sun6i dram
> code might improve readability.

Sounds like another good idea, patches welcome.

Regards,

Hans

  reply	other threads:[~2014-12-19 16:42 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-16 20:31 [U-Boot] [PATCH 01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/ Hans de Goede
2014-12-16 20:31 ` [U-Boot] [PATCH 02/14] sunxi: Add support for the rsb (Reduced Serial Bus) Hans de Goede
2014-12-17  2:22   ` Chen-Yu Tsai
2014-12-17 12:56     ` Hans de Goede
2014-12-18 18:57       ` Ian Campbell
2014-12-18 18:59       ` Ian Campbell
2014-12-19 15:26         ` Hans de Goede
2014-12-16 20:31 ` [U-Boot] [PATCH 03/14] sunxi: axp221: Add axp223 support Hans de Goede
2014-12-17  2:34   ` Chen-Yu Tsai
2014-12-18 10:44     ` Hans de Goede
2014-12-18 19:00   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 04/14] sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage Hans de Goede
2014-12-18 19:02   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 05/14] sunxi: axp221: Make dcdc1 voltage configurable Hans de Goede
2014-12-18 19:03   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 06/14] sunxi: axp221: Explicitly turn off unused voltages Hans de Goede
2014-12-18 19:04   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 07/14] sunxi: axp221: Disable dcdc4 on sun8i (A23) Hans de Goede
2014-12-18 19:05   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 08/14] sun6i: Add a sigma_delta_enable paramter to clock_set_pll5() Hans de Goede
2014-12-18 19:07   ` Ian Campbell
2014-12-19 10:02   ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 09/14] sun6i: Add k and m parameters " Hans de Goede
2014-12-18 19:07   ` Ian Campbell
2014-12-19 10:03   ` Siarhei Siamashka
2014-12-19 16:40     ` Hans de Goede
2014-12-22  7:25       ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 10/14] sunxi: Move await_completion dram helper to dram.h Hans de Goede
2014-12-18 19:08   ` Ian Campbell
2014-12-19 10:06   ` Siarhei Siamashka
2014-12-19 16:42     ` Hans de Goede [this message]
2014-12-22  7:28       ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i Hans de Goede
2014-12-18 19:12   ` Ian Campbell
2014-12-19 10:08     ` Siarhei Siamashka
2014-12-19 16:56       ` Hans de Goede
2014-12-22  7:39         ` Siarhei Siamashka
2014-12-19 16:55     ` Hans de Goede
2014-12-22 14:19       ` Ian Campbell
2014-12-22 14:32         ` Siarhei Siamashka
2014-12-22 14:34           ` Ian Campbell
2014-12-22 15:47         ` Hans de Goede
2014-12-16 20:31 ` [U-Boot] [PATCH 12/14] sunxi: Use memcmp for mctl_mem_matches Hans de Goede
2014-12-18 19:13   ` Ian Campbell
2014-12-16 20:31 ` [U-Boot] [PATCH 13/14] sun8i: Add dram initialization support Hans de Goede
2014-12-18 11:12   ` Chen-Yu Tsai
2014-12-18 19:17   ` Ian Campbell
2014-12-19 16:51     ` Hans de Goede
2014-12-19 10:20   ` Siarhei Siamashka
2014-12-19 17:05     ` Hans de Goede
2014-12-22  7:43       ` Siarhei Siamashka
2014-12-16 20:31 ` [U-Boot] [PATCH 14/14] sun8i: Add defconfig for Ippo_q8h v1.2 Hans de Goede
2014-12-18 19:19   ` Ian Campbell
2014-12-18 18:56 ` [U-Boot] [PATCH 01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/ Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54945592.5010902@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox