[U-Boot] [PATCH 13/14] sun8i: Add dram initialization support

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 18-12-14 20:17, Ian Campbell wrote:
> On Tue, 2014-12-16 at 21:31 +0100, Hans de Goede wrote:
>> Based on the register / dram_para headers from the Allwinner u-boot / linux
>> sources + the init sequences from boot0.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> +/*
>> + * Note this code uses a lot of magic hex values, that is because this code
>> + * simply replays the init sequence as done by the Allwinner boot0 code, so
>> + * we do not know what these values mean. There are no symbolic constants for
>> + * these magic values, since we do not know how to name them and making up
>> + * names for them is not useful.
>
> On that basis I've only really given this a quick glance. I've no
> problem with it.
>
> Couple of queries about the defconfig changes:
>
>> diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
>> index 50c2f93..37aa46d 100644
>> --- a/configs/Ippo_q8h_v5_defconfig
>> +++ b/configs/Ippo_q8h_v5_defconfig
>> @@ -1,8 +1,15 @@
>> +CONFIG_SPL=y
>>   CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
>> -CONFIG_ARM=y
>> -CONFIG_ARCH_SUNXI=y
>> -CONFIG_MACH_SUN8I=y
>> -CONFIG_TARGET_IPPO_Q8H_V5=y
>
> Not replaced with a S: variant? I know you want CONFIG_TARGET to go, but
> I don't think that was part of what you intended in this patch.

Right, I'll add that back.

>
>> -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
>> +CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v5.dtb"
>
> The switch from CONFIG_DEFAULT_DEVICE_TREE to CONFIG_FDTFILE conversion
> seems a little out of place too.

That was deliberate, the CONFIG_DEFAULT_DEVICE_TREE is the wrong CONFIG
define to use to set the dtb for the kernel. I'll split the Ippo_q8h_v5_defconfig
changes out into a separate patch and mention this in the commit message.

Regards,

Hans