From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?RW1pbGlvIEzDs3Bleg==?= Date: Sun, 21 Dec 2014 17:00:46 -0300 Subject: [U-Boot] [linux-sunxi] linux-sunxi/u-boot-sunxi is no longer supported, time to switch to upstream u-boot In-Reply-To: <5495BF7F.4070804@redhat.com> References: <5495BF7F.4070804@redhat.com> Message-ID: <549726EE.8050108@elopez.com.ar> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Hans, El 20/12/14 a las 15:27, Hans de Goede escibi?: > Hi All, > > There are 3 topics which I would like to cover in this mail: > > 1) Switching over to upstream u-boot for the linux-sunxi project (...) > Here are some example instructions on how to build upstream u-boot for > the Cubietruck: > > git clone git://git.denx.de/u-boot.git > cd u-boot > make -j4 CROSS_COMPILE=arm-linux-gnu- Cubietruck_defconfig > # If you want to use an upstream kernel the next steps can be skipped (*) > make -j4 CROSS_COMPILE=arm-linux-gnu- menuconfig > # select "ARM architecture" -> "Enable workarounds for booting old > kernels" > # exit & save > make -j4 CROSS_COMPILE=arm-linux-gnu- spl/menuconfig > # select "ARM architecture" -> "Enable workarounds for booting old > kernels" > # exit & save > # skip to here if you're using an upstream kernel > make -j4 CROSS_COMPILE=arm-linux-gnu- > > And now you will have a u-boot-sunxi-with-spl.bin to dd to your sdcard as > usual. (...) So I thought it'd be a good idea to move over to mainline uboot, but it doesn't seem to be working at all on Cubietruck. When applying power to the board, all I get is U-Boot SPL 2015.01-rc3-00163-gd8bec60 (Dec 21 2014 - 16:43:41) DRAM:Timeout initialising DRAM resetting ... U-Boot SPL 2015.01-rc3-00163-gd8bec60 (Dec 21 2014 - 16:43:41) DRAM:Timeout initialising DRAM resetting ... ...ad infinitum. The hardware itself is fine, the NAND bootloader runs OK and I used the board with an old uboot-sunxi some days back. Any ideas on what may be going on? Cheers! Emilio