From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets.
Date: Tue, 30 Dec 2014 11:36:23 +0100 [thread overview]
Message-ID: <54A28027.3070201@redhat.com> (raw)
In-Reply-To: <54A27DEB.1000005@redhat.com>
Hi,
On 30-12-14 11:26, Hans de Goede wrote:
> Hi,
>
> On 30-12-14 11:18, Siarhei Siamashka wrote:
<snip>
>> BTW, I have done a preliminary automatic conversion for all FEX
>> files from sunxi-boards, which enable lcd0 in fex. The results are
>> now available at the all the same http://linux-sunxi.org/LCD wiki page.
>
> Cool, thanks for doing this!
I've just taken a look, looks good, as for the yellow entries with:
# warning: could not decode 'lcd_power' (port:power0<1><0><default><1>)
Those should be translated to:
CONFIG_VIDEO_LCD_FOO="AXP0-0" for power0
CONFIG_VIDEO_LCD_FOO="AXP0-1" for power1
And I think you can also drop the:
"# warning: 'lcd_pwm' gpio extracted from 'pwm0_para' section"
That seems to be the right thing todo for A23 at least.
Regards,
Hans
next prev parent reply other threads:[~2014-12-30 10:36 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-24 19:06 [U-Boot] sunxi: video: Add LCD output and A13-Olinuxino VGA output support Hans de Goede
2014-12-24 19:06 ` [U-Boot] [PATCH 01/17] videomodes: Add support for refresh and pclk_khz to video_get_params() Hans de Goede
2014-12-28 9:27 ` Ian Campbell
2015-01-08 17:23 ` Anatolij Gustschin
2014-12-24 19:06 ` [U-Boot] [PATCH 02/17] sunxi: gpio: Properly sort mux defines by port number Hans de Goede
2014-12-28 9:28 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 03/17] sunxi: gpio: Add support for gpio pins on the AXP209 pmic Hans de Goede
2014-12-28 9:34 ` Ian Campbell
2014-12-28 10:35 ` Hans de Goede
2014-12-24 19:06 ` [U-Boot] [PATCH 04/17] sunxi: video: Drop disabling of backend / lcdc / hdmi encoder on modeset Hans de Goede
2014-12-28 9:34 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 05/17] sunxi: video: Improve monitor video-mode option handling Hans de Goede
2014-12-28 9:40 ` Ian Campbell
2014-12-28 10:55 ` Hans de Goede
2014-12-24 19:06 ` [U-Boot] [PATCH 06/17] sunxi: video: Prepare for lcd support Hans de Goede
2014-12-28 9:41 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 07/17] sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1 Hans de Goede
2014-12-29 13:36 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 08/17] sunxi: video: Move sunxi_drc_init Hans de Goede
2014-12-25 9:08 ` Chen-Yu Tsai
2014-12-25 10:22 ` Hans de Goede
2014-12-29 13:37 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 09/17] sunxi: video: Add lcd output support Hans de Goede
2014-12-29 13:43 ` Ian Campbell
2014-12-31 11:59 ` Hans de Goede
2014-12-24 19:06 ` [U-Boot] [PATCH 10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23 Hans de Goede
2014-12-29 13:50 ` Ian Campbell
2014-12-31 12:07 ` Hans de Goede
2014-12-24 19:06 ` [U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins Hans de Goede
2014-12-29 13:51 ` Ian Campbell
2014-12-29 19:25 ` Hans de Goede
2014-12-30 2:21 ` Chen-Yu Tsai
2014-12-30 10:21 ` Hans de Goede
2014-12-24 19:06 ` [U-Boot] [PATCH 12/17] sunxi: sunxi-common.h: Reduce bootm_size to take the framebuffer into account Hans de Goede
2014-12-29 13:52 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 13/17] sunxi: A13-OLinuXino defconfigs: Enable VGA output, add lcd-mode for 7" LCD Hans de Goede
2014-12-29 13:53 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 14/17] sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards Hans de Goede
2014-12-29 13:55 ` Ian Campbell
2014-12-29 19:27 ` Hans de Goede
2014-12-30 7:25 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets Hans de Goede
2014-12-25 10:00 ` Chen-Yu Tsai
2014-12-25 10:59 ` Hans de Goede
2014-12-26 6:44 ` Chen-Yu Tsai
2014-12-26 10:48 ` Hans de Goede
2014-12-29 13:57 ` Ian Campbell
2014-12-29 15:56 ` Chen-Yu Tsai
2014-12-29 19:31 ` Hans de Goede
2014-12-30 10:18 ` Siarhei Siamashka
2014-12-30 10:26 ` Hans de Goede
2014-12-30 10:36 ` Hans de Goede [this message]
2014-12-30 11:25 ` Siarhei Siamashka
2014-12-31 11:22 ` Hans de Goede
2014-12-30 12:17 ` Siarhei Siamashka
2014-12-31 11:22 ` Hans de Goede
2015-01-01 2:35 ` Chen-Yu Tsai
2015-01-01 12:36 ` Hans de Goede
2015-01-02 11:02 ` Siarhei Siamashka
2015-01-04 20:22 ` Hans de Goede
2015-01-01 20:03 ` Siarhei Siamashka
2015-01-01 20:15 ` Hans de Goede
2015-01-01 21:05 ` Siarhei Siamashka
2014-12-24 19:06 ` [U-Boot] [PATCH 16/17] sunxi: video: Remove sunxi_display.enabled variable Hans de Goede
2014-12-29 13:57 ` Ian Campbell
2014-12-24 19:06 ` [U-Boot] [PATCH 17/17] sunxi: video: Use sunxi_lcdc_get_clk_delay to calculate tcon1 delay Hans de Goede
2014-12-29 13:58 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54A28027.3070201@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox