From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nishanth Menon <nm@ti.com>
Date: Wed, 07 Jan 2015 18:16:22 -0600
Subject: [U-Boot] Nokia RX-51 (N900) board broken
In-Reply-To: <201501071012.57171@pali>
References: <201501031147.33523@pali>
	<201501062319.22459@pali>	<54AC6324.8030407@gmail.com>
	<201501071012.57171@pali>
Message-ID: <54ADCC56.4050202@ti.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 01/07/2015 03:12 AM, Pali Roh?r wrote:
>
> @Tom, Nishanth, or anybody from TI: how to check if omap device
> type is HS in uboot? In linux kernel it is possible by:
>
> if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { ... }
it should be.
CONTROL_STATUS register exists in almost all omap2+ devices.
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/mach-omap2/id.c#n53

http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/mach-omap2/soc.h#n120

omap3 u-boot implements get_device_type

http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/omap3/sys_info.c;h=bbb65bbe7263674c2b47b97ee05a9f588ed1c58f;hb=HEAD#l265

Macro HS_DEVICE could be used?

--
Regards,
Nishanth Menon