From mboxrd@z Thu Jan  1 00:00:00 1970
From: York Sun <yorksun@freescale.com>
Date: Wed, 14 Jan 2015 13:55:00 -0800
Subject: [U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay
In-Reply-To: <BY2PR03MB192AB8530F3712E582D8BC8EC560@BY2PR03MB192.namprd03.prod.outlook.com>
References: <1418628525-16528-1-git-send-email-harninder.rai@freescale.com>
	<548F12CA.5090902@freescale.com>,
	<BL2PR03MB1775493473DA19E92695817EC6C0@BL2PR03MB177.namprd03.prod.outlook.com>
	<x3cfafc7dhlmdxunqwhpl7ti.1418710528934@email.android.com>
	<BL2PR03MB177ADE2E7830DA17FD834D0EC6C0@BL2PR03MB177.namprd03.prod.outlook.com>
	<5490601B.2080205@freescale.com>
	<BY2PR03MB192AB8530F3712E582D8BC8EC560@BY2PR03MB192.namprd03.prod.outlook.com>
Message-ID: <54B6E5B4.6050600@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 12/21/2014 09:22 PM, Rai Harninder-B01044 wrote:
>> I am guessing you has some extra character for the CONFIG_BOOTDELAY. Anyway,
>> since you are on this line common/autoboot.c:247, you can see the "bootdelay"
>> variable one line above. Your purpose of adding delay to boot is easily
>> implemented by these command under u-boot
>>
>> setenv bootdelay 10
>> saveenv
>>
>> There is no need to change the code for this purpose.
> Thanks for the review. Let me look into this
> 

I took another look at this patch. It is harmless and adding the default value
is correct. I will accept this patch and add commit message.

York