[U-Boot] [PATCH 1/9] sunxi: axp209: Disable interrupts when intializing the axp209

[U-Boot] [PATCH 1/9] sunxi: axp209: Disable interrupts when intializing the axp209

[Hans de Goede]

We do not use the axp209 interrupt, and at least in my mini-x (which does not
have a power button) the pwr-button pin and the irq pin are soldered together,
so if the axp209 keeps it irq asserted to long it will see a 10s pwr-button
press and hard power off the board, disabling the irqs fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/power/axp209.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c
index 3b1a6a7..4565398 100644
--- a/drivers/power/axp209.c
+++ b/drivers/power/axp209.c
@@ -16,6 +16,11 @@ enum axp209_reg {
 	AXP209_DCDC3_VOLTAGE = 0x27,
 	AXP209_LDO24_VOLTAGE = 0x28,
 	AXP209_LDO3_VOLTAGE = 0x29,
+	AXP209_IRQ_ENABLE1 = 0x40,
+	AXP209_IRQ_ENABLE2 = 0x41,
+	AXP209_IRQ_ENABLE3 = 0x42,
+	AXP209_IRQ_ENABLE4 = 0x43,
+	AXP209_IRQ_ENABLE5 = 0x44,
 	AXP209_IRQ_STATUS5 = 0x4c,
 	AXP209_SHUTDOWN = 0x32,
 	AXP209_GPIO0_CTRL = 0x90,
@@ -143,7 +148,7 @@ int axp209_set_ldo4(int mvolt)
 int axp209_init(void)
 {
 	u8 ver;
-	int rc;
+	int i, rc;
 
 	rc = axp209_read(AXP209_CHIP_VERSION, &ver);
 	if (rc)
@@ -155,6 +160,13 @@ int axp209_init(void)
 	if (ver != 0x1)
 		return -1;
 
+	/* Mask all interrupts */
+	for (i = AXP209_IRQ_ENABLE1; i <= AXP209_IRQ_ENABLE5; i++) {
+		rc = axp209_write(i, 0);
+		if (rc)
+			return rc;
+	}
+
 	return 0;
 }
 
-- 
2.1.0

[U-Boot] [PATCH 2/9] sunxi: ba10_tv_box_defconfig: Fix USB not working

[Hans de Goede]

PH12 is Vbus enable for Vbus2, not Vbus1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 configs/ba10_tv_box_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 6ca7c57..37bf51b 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -1,7 +1,7 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
-CONFIG_USB1_VBUS_PIN="PH12"
+CONFIG_USB2_VBUS_PIN="PH12"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-- 
2.1.0

[U-Boot] [PATCH 2/9] sunxi: ba10_tv_box_defconfig: Fix USB not working

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> PH12 is Vbus enable for Vbus2, not Vbus1.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Ian Campbell <ijc@hellion.org.uk>

[U-Boot] [PATCH 3/9] sunxi: Stop differentiating between 512M and 1G variants of the same board

[Hans de Goede]

While working on adding more boards I noticed that we lack a config for
the 512M cubieboard, and that some of the new boards which I want to add also
have 512M and 1G variants, rather then adding 2 defconfig's for all of these,
lets switch the exising boards which have both a 512M and 1024M variant over
to the sun4i dram autoconfig code.

This also drops the foo_RAMSIZE_defconfig variants of boards where we currently
have 2 separate configs already.

Note:
1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with
a value other then its default for now, but we need this to be configurable
to support some new boards with auto dram config.

2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match
the defaults, this is done to make it more clear what values are used for a
certain board.

This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G
variants, the dram autoconfig code has also been tested on a 512M mk802
(a defconfig for the mk802 is added in a later patch).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/include/asm/arch-sunxi/dram_sun4i.h |  2 +-
 board/sunxi/Kconfig                          | 36 +++++++++++++++-------------
 board/sunxi/MAINTAINERS                      |  2 --
 board/sunxi/Makefile                         |  8 +++----
 board/sunxi/dram_cubieboard.c                | 31 ------------------------
 board/sunxi/dram_sun4i_360_1024_iow16.c      | 31 ------------------------
 board/sunxi/dram_sun4i_360_1024_iow8.c       | 31 ------------------------
 board/sunxi/dram_sun4i_360_512.c             | 31 ------------------------
 board/sunxi/dram_sun4i_auto.c                | 31 ++++++++++++++++++++++++
 configs/Cubieboard_defconfig                 |  3 +++
 configs/Mele_A1000G_defconfig                |  8 -------
 configs/Mele_A1000_defconfig                 |  3 +++
 configs/Mini-X-1Gb_defconfig                 |  7 ------
 configs/Mini-X_defconfig                     |  3 +++
 14 files changed, 63 insertions(+), 164 deletions(-)
 delete mode 100644 board/sunxi/dram_cubieboard.c
 delete mode 100644 board/sunxi/dram_sun4i_360_1024_iow16.c
 delete mode 100644 board/sunxi/dram_sun4i_360_1024_iow8.c
 delete mode 100644 board/sunxi/dram_sun4i_360_512.c
 create mode 100644 board/sunxi/dram_sun4i_auto.c
 delete mode 100644 configs/Mele_A1000G_defconfig
 delete mode 100644 configs/Mini-X-1Gb_defconfig

diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun4i.h b/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
index 6c1ec5b..40c385a 100644
--- a/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
@@ -76,7 +76,7 @@ struct dram_para {
 	u32 cas;
 	u32 zq;
 	u32 odt_en;
-	u32 size;
+	u32 size; /* For compat with dram.c files from u-boot-sunxi, unused */
 	u32 tpr0;
 	u32 tpr1;
 	u32 tpr2;
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index e65b8af..f7064d0 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -37,21 +37,31 @@ config MACH_SUN9I
 
 endchoice
 
-if MACH_SUN6I || MACH_SUN8I
-
 config DRAM_CLK
-	int "sun6i dram clock speed"
-	default 312
+	int "sunxi dram clock speed"
+	default 312 if MACH_SUN6I || MACH_SUN8I
+	default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	---help---
 	Set the dram clock speed, valid range 240 - 480, must be a multiple
-	of 24.
+	of 24. Note on sun4i / sun5i / sun7i this is only used by boards
+	which use dram autoconfig.
 
 config DRAM_ZQ
-	int "sun6i dram zq value"
-	default 123
+	int "sunxi dram zq value"
+	default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
+	default 127 if MACH_SUN7I
 	---help---
-	Set the dram zq value.
-
+	Set the dram zq value. Note on sun4i / sun5i / sun7i this is only
+	used by boards which use dram autoconfig.
+
+if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+config DRAM_EMR1
+	int "sunxi dram emr1 value"
+	default 0 if MACH_SUN4I
+	default 4 if MACH_SUN5I || MACH_SUN7I
+	---help---
+	Set the dram controller emr1 value. Note this is only used by boards
+	which use dram autoconfig.
 endif
 
 config SYS_CONFIG_NAME
@@ -141,10 +151,6 @@ config TARGET_PCDUINO3
 	bool "PCDUINO3"
 	depends on MACH_SUN7I
 
-config TARGET_MELE_A1000G
-	bool "MELE_A1000G"
-	depends on MACH_SUN4I
-
 config TARGET_MELE_A1000
 	bool "MELE_A1000"
 	depends on MACH_SUN4I
@@ -157,10 +163,6 @@ config TARGET_MELE_M9
 	bool "MELE_M9"
 	depends on MACH_SUN6I
 
-config TARGET_MINI_X_1GB
-	bool "MINI_X_1GB"
-	depends on MACH_SUN4I
-
 config TARGET_MINI_X
 	bool "MINI_X"
 	depends on MACH_SUN4I
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 7cd0b20..16429d4 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -8,10 +8,8 @@ F:	configs/ba10_tv_box_defconfig
 F:	configs/Chuwi_V7_CW0825_defconfig
 F:	configs/Cubieboard_defconfig
 F:	configs/Mele_A1000_defconfig
-F:	configs/Mele_A1000G_defconfig
 F:	configs/Mele_M3_defconfig
 F:	configs/Mini-X_defconfig
-F:	configs/Mini-X-1Gb_defconfig
 F:	include/configs/sun5i.h
 F:	configs/A10s-OLinuXino-M_defconfig
 F:	configs/A13-OLinuXino_defconfig
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index b0a9b9e..606bf73 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -24,15 +24,13 @@ obj-$(CONFIG_TARGET_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
 obj-$(CONFIG_TARGET_BANANAPI)		+= dram_bananapi.o
 obj-$(CONFIG_TARGET_BANANAPRO)		+= dram_bananapi.o
 obj-$(CONFIG_TARGET_CHUWI_V7_CW0825)	+= dram_sun4i_408_1024_iow16.o
-obj-$(CONFIG_TARGET_CUBIEBOARD)		+= dram_cubieboard.o
+obj-$(CONFIG_TARGET_CUBIEBOARD)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_CUBIEBOARD2)	+= dram_cubieboard2.o
 obj-$(CONFIG_TARGET_CUBIETRUCK)		+= dram_cubietruck.o
 obj-$(CONFIG_TARGET_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_360_512.o
-obj-$(CONFIG_TARGET_MELE_A1000G)	+= dram_sun4i_360_1024_iow8.o
+obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_360_512.o
-obj-$(CONFIG_TARGET_MINI_X_1GB)		+= dram_sun4i_360_1024_iow16.o
+obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
 obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
 obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
diff --git a/board/sunxi/dram_cubieboard.c b/board/sunxi/dram_cubieboard.c
deleted file mode 100644
index 399028c..0000000
--- a/board/sunxi/dram_cubieboard.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_360_1024_iow16.c b/board/sunxi/dram_sun4i_360_1024_iow16.c
deleted file mode 100644
index 3763713..0000000
--- a/board/sunxi/dram_sun4i_360_1024_iow16.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 360,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_360_1024_iow8.c b/board/sunxi/dram_sun4i_360_1024_iow8.c
deleted file mode 100644
index 2a5c9ed..0000000
--- a/board/sunxi/dram_sun4i_360_1024_iow8.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 360,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_360_512.c b/board/sunxi/dram_sun4i_360_512.c
deleted file mode 100644
index 48aa6e2..0000000
--- a/board/sunxi/dram_sun4i_360_512.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 360,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c
new file mode 100644
index 0000000..115b597
--- /dev/null
+++ b/board/sunxi/dram_sun4i_auto.c
@@ -0,0 +1,31 @@
+/* this file is generated, don't edit it yourself */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+	.clock = CONFIG_DRAM_CLK,
+	.type = 3,
+	.rank_num = 1,
+	.density = 0,
+	.io_width = 0,
+	.bus_width = 0,
+	.cas = 6,
+	.zq = CONFIG_DRAM_ZQ,
+	.odt_en = 0,
+	.size = 0,
+	.tpr0 = 0x30926692,
+	.tpr1 = 0x1090,
+	.tpr2 = 0x1a0c8,
+	.tpr3 = 0,
+	.tpr4 = 0,
+	.tpr5 = 0,
+	.emr1 = CONFIG_DRAM_EMR1,
+	.emr2 = 0,
+	.emr3 = 0,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+	return dramc_init(&dram_para);
+}
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index 0bc45fd..b256b95 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -5,3 +5,6 @@ CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb"
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_CUBIEBOARD=y
++S:CONFIG_DRAM_CLK=480
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
diff --git a/configs/Mele_A1000G_defconfig b/configs/Mele_A1000G_defconfig
deleted file mode 100644
index 9cb3285..0000000
--- a/configs/Mele_A1000G_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
-CONFIG_VIDEO_VGA=y
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_SUNXI=y
-+S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_MELE_A1000G=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 97d9454..3b4a19e 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -6,3 +6,6 @@ CONFIG_VIDEO_VGA=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_MELE_A1000=y
++S:CONFIG_DRAM_CLK=360
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
diff --git a/configs/Mini-X-1Gb_defconfig b/configs/Mini-X-1Gb_defconfig
deleted file mode 100644
index b8fea01..0000000
--- a/configs/Mini-X-1Gb_defconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_SUNXI=y
-+S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_MINI_X_1GB=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index 0f6bbe0..bb39464 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -5,3 +5,6 @@ CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_MINI_X=y
++S:CONFIG_DRAM_CLK=360
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
-- 
2.1.0

[U-Boot] [PATCH 3/9] sunxi: Stop differentiating between 512M and 1G variants of the same board

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c
> new file mode 100644
> index 0000000..115b597
> --- /dev/null
> +++ b/board/sunxi/dram_sun4i_auto.c
> @@ -0,0 +1,31 @@
> +/* this file is generated, don't edit it yourself */

This isn't strictly true any more, is it?

Acked-by: Ian Campbell <ijc@hellion.org.uk>

Ian.

[U-Boot] [PATCH 3/9] sunxi: Stop differentiating between 512M and 1G variants of the same board

[Hans de Goede]

Hi,

On 18-01-15 17:22, Ian Campbell wrote:
> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
>> diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c
>> new file mode 100644
>> index 0000000..115b597
>> --- /dev/null
>> +++ b/board/sunxi/dram_sun4i_auto.c
>> @@ -0,0 +1,31 @@
>> +/* this file is generated, don't edit it yourself */
>
> This isn't strictly true any more, is it?

Yeah I was thinking the same thing when working on this but I
wasn't sure what to do I'll drop the comment, as it is clearly
false.

And thanks for the reviews.

> Acked-by: Ian Campbell <ijc@hellion.org.uk>

Regards,

Hans

[U-Boot] [PATCH 3/9] sunxi: Stop differentiating between 512M and 1G variants of the same board

[Siarhei Siamashka]

On Sun, 18 Jan 2015 13:23:26 +0100
Hans de Goede <hdegoede@redhat.com> wrote:

> While working on adding more boards I noticed that we lack a config for
> the 512M cubieboard, and that some of the new boards which I want to add also
> have 512M and 1G variants, rather then adding 2 defconfig's for all of these,
> lets switch the exising boards which have both a 512M and 1024M variant over
> to the sun4i dram autoconfig code.
> 
> This also drops the foo_RAMSIZE_defconfig variants of boards where we currently
> have 2 separate configs already.
> 
> Note:
> 1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with
> a value other then its default for now, but we need this to be configurable
> to support some new boards with auto dram config.
> 
> 2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match
> the defaults, this is done to make it more clear what values are used for a
> certain board.
> 
> This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G
> variants, the dram autoconfig code has also been tested on a 512M mk802
> (a defconfig for the mk802 is added in a later patch).
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Thanks for finally finding time to do some refinements in this pile of
junk dram settings for the boards that you are maintaining.

I think that adding the Kconfig options is fine as long as they
are not abused and the 'dram_para' structure is kept. We want to
be able to update DRAM settings without the need of recompiling SPL.
Currently this can be relatively easily done by finding and patching
the 'dram_para' structure inside of the SPL binary.

In general this looks like a good change. However see below.

[...]

> +++ b/board/sunxi/dram_sun4i_auto.c
> @@ -0,0 +1,31 @@
> +/* this file is generated, don't edit it yourself */
> +
> +#include <common.h>
> +#include <asm/arch/dram.h>
> +
> +static struct dram_para dram_para = {
> +	.clock = CONFIG_DRAM_CLK,
> +	.type = 3,
> +	.rank_num = 1,
> +	.density = 0,
> +	.io_width = 0,
> +	.bus_width = 0,
> +	.cas = 6,
> +	.zq = CONFIG_DRAM_ZQ,
> +	.odt_en = 0,
> +	.size = 0,
> +	.tpr0 = 0x30926692,
> +	.tpr1 = 0x1090,
> +	.tpr2 = 0x1a0c8,
> +	.tpr3 = 0,
> +	.tpr4 = 0,
> +	.tpr5 = 0,
> +	.emr1 = CONFIG_DRAM_EMR1,
> +	.emr2 = 0,
> +	.emr3 = 0,
> +};

As we already discussed earlier
    http://lists.denx.de/pipermail/u-boot/2014-September/189266.html
these tpr0/tpr1/tpr2 settings are configured for DDR2-800E (and 400MHz
clock speed because of double data rate). Yes, DDR2 (!) instead of
DDR3. This in practice is not very much off from DDR3-800, except for
the tXS parameter. But tXS is only relevant for self-refresh, which is
currently not used by the u-boot or the mainline kernel anyway. That's
why this all does not crash and burn in an obvious way.

Anyway, these timings are still wrong for the boards running DRAM
at the clock speeds higher than 400MHz. For example, they are ~20%
outside of the valid range at 480MHz and this all works by pure luck,
thanks to the hardware typically having some safety/overclocking margin.

If we look at the parameters used by the sun7i boards:
	.cas = 9,
	.tpr0 = 0x42d899b7,
	.tpr1 = 0xa090,
	.tpr2 = 0x22a00,
... then we can see that the settings are also a bit fishy. The
tpr1/tpr2 parameters are matching DDR3-800 timings. And tpr0 is
matching DDR3-1333 timings with 1KB (!) page size, while many sunxi
devices are using 2KB pages. So it's some weird crossbreed, which
is however somewhat less wrong than the settings from sun4i boards.

I would suggest trying one of the following DRAM settings, generated
as explained at http://linux-sunxi.org/Mainline_U-boot#DRAM_Settings
And injecting the .clock, .zq and .emr1 parameters from Kconfig.

static struct dram_para dram_para = { /* DRAM timings: 7-7-7-18 (480 MHz) */
	.clock     = 480,
	.type      = 3,
	.rank_num  = 1,
	.cas       = 7,
	.zq        = 0x7b,
	.odt_en    = 0,
	.tpr0      = 0x30927790,
	.tpr1      = 0xa0b0,
	.tpr2      = 0x23200,
	.tpr3      = 0x0,
	.tpr4      = 0x0,
	.tpr5      = 0x0,
	.emr1      = 0x0,
	.emr2      = 0x8,
	.emr3      = 0x0,
	.active_windowing = 1,
};

static struct dram_para dram_para = { /* DRAM timings: 7-8-8-20 (528 MHz) */
	.clock     = 528,
	.type      = 3,
	.rank_num  = 1,
	.cas       = 7,
	.zq        = 0x7b,
	.odt_en    = 0,
	.tpr0      = 0x36948890,
	.tpr1      = 0xa0c0,
	.tpr2      = 0x23600,
	.tpr3      = 0x0,
	.tpr4      = 0x0,
	.tpr5      = 0x0,
	.emr1      = 0x0,
	.emr2      = 0x8,
	.emr3      = 0x0,
	.active_windowing = 1,
};

Alternatively, we can add runtime calculation of cas/tpr0/tpr1/tpr2/emr2
parameters directly into SPL, thus better matching the selected DRAM
clock speed and reducing memory access latency. The disadvantages of
this approach are:
1. Somewhat increased SPL size.
2. Some DDR3 chips have better timings than generic JEDEC speed bins, so
   using generic timings for every board may be not very optimal.

This all is only blocked on the lack of cooperation from the u-boot
sunxi boards maintainers, who appear to be kinda happy with the status
quo and prefer the sacred magic settings from the vendors over what is
suggested by the geeks doing reverse engineering ;-)

To sum it up. We need motivated testers in order to improve things.
Clever hackers are not really required.

-- 
Best regards,
Siarhei Siamashka

[U-Boot] [PATCH 3/9] sunxi: Stop differentiating between 512M and 1G variants of the same board

[Hans de Goede]

Hi,

On 18-01-15 22:46, Siarhei Siamashka wrote:
> On Sun, 18 Jan 2015 13:23:26 +0100
> Hans de Goede <hdegoede@redhat.com> wrote:
>
>> While working on adding more boards I noticed that we lack a config for
>> the 512M cubieboard, and that some of the new boards which I want to add also
>> have 512M and 1G variants, rather then adding 2 defconfig's for all of these,
>> lets switch the exising boards which have both a 512M and 1024M variant over
>> to the sun4i dram autoconfig code.
>>
>> This also drops the foo_RAMSIZE_defconfig variants of boards where we currently
>> have 2 separate configs already.
>>
>> Note:
>> 1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with
>> a value other then its default for now, but we need this to be configurable
>> to support some new boards with auto dram config.
>>
>> 2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match
>> the defaults, this is done to make it more clear what values are used for a
>> certain board.
>>
>> This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G
>> variants, the dram autoconfig code has also been tested on a 512M mk802
>> (a defconfig for the mk802 is added in a later patch).
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Thanks for finally finding time to do some refinements in this pile of
> junk dram settings for the boards that you are maintaining.
>
> I think that adding the Kconfig options is fine as long as they
> are not abused and the 'dram_para' structure is kept. We want to
> be able to update DRAM settings without the need of recompiling SPL.
> Currently this can be relatively easily done by finding and patching
> the 'dram_para' structure inside of the SPL binary.
>
> In general this looks like a good change. However see below.
>
> [...]
>
>> +++ b/board/sunxi/dram_sun4i_auto.c
>> @@ -0,0 +1,31 @@
>> +/* this file is generated, don't edit it yourself */
>> +
>> +#include <common.h>
>> +#include <asm/arch/dram.h>
>> +
>> +static struct dram_para dram_para = {
>> +	.clock = CONFIG_DRAM_CLK,
>> +	.type = 3,
>> +	.rank_num = 1,
>> +	.density = 0,
>> +	.io_width = 0,
>> +	.bus_width = 0,
>> +	.cas = 6,
>> +	.zq = CONFIG_DRAM_ZQ,
>> +	.odt_en = 0,
>> +	.size = 0,
>> +	.tpr0 = 0x30926692,
>> +	.tpr1 = 0x1090,
>> +	.tpr2 = 0x1a0c8,
>> +	.tpr3 = 0,
>> +	.tpr4 = 0,
>> +	.tpr5 = 0,
>> +	.emr1 = CONFIG_DRAM_EMR1,
>> +	.emr2 = 0,
>> +	.emr3 = 0,
>> +};
>
> As we already discussed earlier
>      http://lists.denx.de/pipermail/u-boot/2014-September/189266.html
> these tpr0/tpr1/tpr2 settings are configured for DDR2-800E (and 400MHz
> clock speed because of double data rate). Yes, DDR2 (!) instead of
> DDR3. This in practice is not very much off from DDR3-800, except for
> the tXS parameter. But tXS is only relevant for self-refresh, which is
> currently not used by the u-boot or the mainline kernel anyway. That's
> why this all does not crash and burn in an obvious way.
>
> Anyway, these timings are still wrong for the boards running DRAM
> at the clock speeds higher than 400MHz. For example, they are ~20%
> outside of the valid range at 480MHz and this all works by pure luck,
> thanks to the hardware typically having some safety/overclocking margin.
>
> If we look at the parameters used by the sun7i boards:
> 	.cas = 9,
> 	.tpr0 = 0x42d899b7,
> 	.tpr1 = 0xa090,
> 	.tpr2 = 0x22a00,
> ... then we can see that the settings are also a bit fishy. The
> tpr1/tpr2 parameters are matching DDR3-800 timings. And tpr0 is
> matching DDR3-1333 timings with 1KB (!) page size, while many sunxi
> devices are using 2KB pages. So it's some weird crossbreed, which
> is however somewhat less wrong than the settings from sun4i boards.
>
> I would suggest trying one of the following DRAM settings, generated
> as explained at http://linux-sunxi.org/Mainline_U-boot#DRAM_Settings
> And injecting the .clock, .zq and .emr1 parameters from Kconfig.
>
> static struct dram_para dram_para = { /* DRAM timings: 7-7-7-18 (480 MHz) */
> 	.clock     = 480,
> 	.type      = 3,
> 	.rank_num  = 1,
> 	.cas       = 7,
> 	.zq        = 0x7b,
> 	.odt_en    = 0,
> 	.tpr0      = 0x30927790,
> 	.tpr1      = 0xa0b0,
> 	.tpr2      = 0x23200,
> 	.tpr3      = 0x0,
> 	.tpr4      = 0x0,
> 	.tpr5      = 0x0,
> 	.emr1      = 0x0,
> 	.emr2      = 0x8,
> 	.emr3      = 0x0,
> 	.active_windowing = 1,
> };
>
> static struct dram_para dram_para = { /* DRAM timings: 7-8-8-20 (528 MHz) */
> 	.clock     = 528,
> 	.type      = 3,
> 	.rank_num  = 1,
> 	.cas       = 7,
> 	.zq        = 0x7b,
> 	.odt_en    = 0,
> 	.tpr0      = 0x36948890,
> 	.tpr1      = 0xa0c0,
> 	.tpr2      = 0x23600,
> 	.tpr3      = 0x0,
> 	.tpr4      = 0x0,
> 	.tpr5      = 0x0,
> 	.emr1      = 0x0,
> 	.emr2      = 0x8,
> 	.emr3      = 0x0,
> 	.active_windowing = 1,
> };
>
> Alternatively, we can add runtime calculation of cas/tpr0/tpr1/tpr2/emr2
> parameters directly into SPL, thus better matching the selected DRAM
> clock speed and reducing memory access latency. The disadvantages of
> this approach are:
> 1. Somewhat increased SPL size.
> 2. Some DDR3 chips have better timings than generic JEDEC speed bins, so
>     using generic timings for every board may be not very optimal.
>
> This all is only blocked on the lack of cooperation from the u-boot
> sunxi boards maintainers, who appear to be kinda happy with the status
> quo and prefer the sacred magic settings from the vendors over what is
> suggested by the geeks doing reverse engineering ;-)

Siarhei, thanks for bringing this topic up once again, I agree that this
is ideally something which we should fix. The problem is that the only
way to know that any new settings which we do are actually good, is to
test them on lots of boards, and I do not mean one of each board, but
at least 10 of each board or some such.

Unfortunately that is not really feasible due to -ENOHWARDARE (not 10
of each) and -ENOTIME.

Still I would like to get this sorted, so I would like to move to the
recommended timings for the generic JEDEC speed bins, you rightfully
point out that those may not be 100% optimal, but given that we're
dealing with a lot of cheap boards, I think that those are our best bet.

The plan would be for you to submit a patch for that, and then I'll add
that to my sunxi-wip branch right away, this way all the testing I do,
as well as all the testing people using my sunxi-wip branch do will use
the new timings, and then once v2015.04 stabilizes a bit we can add
that patch to u-boot-sunxi/next, getting it ready for v2015.07 .

Does that sound like a plan ?

Ian, what do you think about this ?

As for runtime calculation, it might be easier to instead do something
like this in the "new" dram_sun4i_auto.c file which my patch-set
introduces:

#if CONFIG_DRAM_CLK > 528
#error DRAM clocks above 528 Mhz are not supported
#elif CONFIG_DRAM_CLK > 480

static struct dram_para dram_para = { /* DRAM timings: 7-8-8-20 (528 MHz) */
	.clock     = CONFIG_DRAM_CLK,
...
};

#elif CONFIG_DRAM_CLK > 400

static struct dram_para dram_para = { /* DRAM timings: 7-7-7-18 (480 MHz) */
	.clock     = CONFIG_DRAM_CLK,
...
};

#elif CONFIG_DRAM_CLK > 360

static struct dram_para dram_para = { /* DRAM timings: a-b-c-d (400 MHz) */
	.clock     = CONFIG_DRAM_CLK,
...
};

#else

static struct dram_para dram_para = { /* DRAM timings: a-b-c-d (360 MHz) */
	.clock     = CONFIG_DRAM_CLK,
...
};

#endif

This way we will not grow the spl, and keep an easy editable set of
dram_para in the spl for people who like to hexedit the spl ...

Regards,

Hans

[U-Boot] [PATCH 3/9] sunxi: Stop differentiating between 512M and 1G variants of the same board

[Ian Campbell]

On Mon, 2015-01-19 at 15:35 +0100, Hans de Goede wrote:
> Siarhei, thanks for bringing this topic up once again, I agree that this
> is ideally something which we should fix. The problem is that the only
> way to know that any new settings which we do are actually good, is to
> test them on lots of boards, and I do not mean one of each board, but
> at least 10 of each board or some such.

I agree. Having settings which are optimal for Hans' board but untested
elsewhere would not be a good idea IMHO.

> Still I would like to get this sorted, so I would like to move to the
> recommended timings for the generic JEDEC speed bins, you rightfully
> point out that those may not be 100% optimal, but given that we're
> dealing with a lot of cheap boards, I think that those are our best bet.

Agreed. In the absence of an ability to test lots of boards this is
probably the best we can do.

An alternative would be to use the settings from the factory firmware,
but I don't think we have any real reason to think these will be any
better in general than the JEDEC timings, at least not without lots of
testing (see previous paragraph).

> The plan would be for you to submit a patch for that, and then I'll add
> that to my sunxi-wip branch right away, this way all the testing I do,
> as well as all the testing people using my sunxi-wip branch do will use
> the new timings, and then once v2015.04 stabilizes a bit we can add
> that patch to u-boot-sunxi/next, getting it ready for v2015.07 .
> 
> Does that sound like a plan ?
> 
> Ian, what do you think about this ?

Go for it.

> This way we will not grow the spl, and keep an easy editable set of
> dram_para in the spl for people who like to hexedit the spl ...

At the start of the #ifdef chain you could add

#ifdef CONFIG...CUSTOM_DRAM_SETTINGS
static struct dram_para dram_para = {
    CONFIG_...CUSTOM_DRAM_SETTINGS
};
#elif ...

along with a corresponding Kconfig entry (perhaps depends on EXPERT?).

Then people who really want to tweak things could enter
"CONFIG....=.clock=XXX,.type=YYY,.." in their .config (menuconfig etc)
or defconfig to their heart's content. (only question is what the
character limit on a config option is...)

Ian.

[U-Boot] [PATCH 4/9] sunxi: Convert Linksprite_pcDuino_defconfig to use auto dram configuration

[Hans de Goede]

Currently we've separate detailed dram settings for all sun4i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 board/sunxi/Makefile                   |  2 +-
 board/sunxi/dram_sun4i_408_1024_iow8.c | 31 -------------------------------
 configs/Linksprite_pcDuino_defconfig   |  3 +++
 3 files changed, 4 insertions(+), 32 deletions(-)
 delete mode 100644 board/sunxi/dram_sun4i_408_1024_iow8.c

diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 606bf73..0111b56 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -32,7 +32,7 @@ obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
 obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
+obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
 obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
 obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
diff --git a/board/sunxi/dram_sun4i_408_1024_iow8.c b/board/sunxi/dram_sun4i_408_1024_iow8.c
deleted file mode 100644
index c6d87d2..0000000
--- a/board/sunxi/dram_sun4i_408_1024_iow8.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index f5b0ca9..0bf329e 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -5,3 +5,6 @@ CONFIG_FDTFILE="sun4i-a10-pcduino.dtb"
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_PCDUINO=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
-- 
2.1.0

[U-Boot] [PATCH 4/9] sunxi: Convert Linksprite_pcDuino_defconfig to use auto dram configuration

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> Currently we've separate detailed dram settings for all sun4i boards, this
> moves them

There's only one board here, did you intend for the next patch to be
folder with this one as a bulk switch? Or is there something
particularly interesting about this one?

>  over to using auto dram configuration so that we can get rid of
> all the per board dram_foo.c files.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  board/sunxi/Makefile                   |  2 +-
>  board/sunxi/dram_sun4i_408_1024_iow8.c | 31 -------------------------------
>  configs/Linksprite_pcDuino_defconfig   |  3 +++
>  3 files changed, 4 insertions(+), 32 deletions(-)
>  delete mode 100644 board/sunxi/dram_sun4i_408_1024_iow8.c
> 
> diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
> index 606bf73..0111b56 100644
> --- a/board/sunxi/Makefile
> +++ b/board/sunxi/Makefile
> @@ -32,7 +32,7 @@ obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_auto.o
>  obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
>  obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_auto.o
>  obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
> -obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
> +obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_auto.o
>  obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
>  obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
>  obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
> diff --git a/board/sunxi/dram_sun4i_408_1024_iow8.c b/board/sunxi/dram_sun4i_408_1024_iow8.c
> deleted file mode 100644
> index c6d87d2..0000000
> --- a/board/sunxi/dram_sun4i_408_1024_iow8.c
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -/* this file is generated, don't edit it yourself */
> -
> -#include <common.h>
> -#include <asm/arch/dram.h>
> -
> -static struct dram_para dram_para = {
> -	.clock = 408,
> -	.type = 3,
> -	.rank_num = 1,
> -	.density = 2048,
> -	.io_width = 8,
> -	.bus_width = 32,
> -	.cas = 6,
> -	.zq = 123,
> -	.odt_en = 0,
> -	.size = 1024,
> -	.tpr0 = 0x30926692,
> -	.tpr1 = 0x1090,
> -	.tpr2 = 0x1a0c8,
> -	.tpr3 = 0,
> -	.tpr4 = 0,
> -	.tpr5 = 0,
> -	.emr1 = 0,
> -	.emr2 = 0,
> -	.emr3 = 0,
> -};
> -
> -unsigned long sunxi_dram_init(void)
> -{
> -	return dramc_init(&dram_para);
> -}
> diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
> index f5b0ca9..0bf329e 100644
> --- a/configs/Linksprite_pcDuino_defconfig
> +++ b/configs/Linksprite_pcDuino_defconfig
> @@ -5,3 +5,6 @@ CONFIG_FDTFILE="sun4i-a10-pcduino.dtb"
>  +S:CONFIG_ARCH_SUNXI=y
>  +S:CONFIG_MACH_SUN4I=y
>  +S:CONFIG_TARGET_PCDUINO=y
> ++S:CONFIG_DRAM_CLK=408
> ++S:CONFIG_DRAM_ZQ=123
> ++S:CONFIG_DRAM_EMR1=0

[U-Boot] [PATCH 4/9] sunxi: Convert Linksprite_pcDuino_defconfig to use auto dram configuration

[Ian Campbell]

On Sun, 2015-01-18 at 16:24 +0000, Ian Campbell wrote:
> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> > Currently we've separate detailed dram settings for all sun4i boards, this
> > moves them
> 
> There's only one board here, did you intend for the next patch to be
> folder with this one as a bulk switch? Or is there something
> particularly interesting about this one?

Maybe you intended to Cc Zoltan who is listed in MAINTAINERS for this
board for testing? (Whereas apparently you own all the ones in the next
patch).

[U-Boot] [PATCH 4/9] sunxi: Convert Linksprite_pcDuino_defconfig to use auto dram configuration

[Hans de Goede]

Hi,

On 18-01-15 17:26, Ian Campbell wrote:
> On Sun, 2015-01-18 at 16:24 +0000, Ian Campbell wrote:
>> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
>>> Currently we've separate detailed dram settings for all sun4i boards, this
>>> moves them
>>
>> There's only one board here, did you intend for the next patch to be
>> folder with this one as a bulk switch? Or is there something
>> particularly interesting about this one?
>
> Maybe you intended to Cc Zoltan who is listed in MAINTAINERS for this
> board for testing? (Whereas apparently you own all the ones in the next
> patch).

Right, but rather then Cc-ing him I've mailed him privately.

Regards,

Hans

[U-Boot] [PATCH 4/9] sunxi: Convert Linksprite_pcDuino_defconfig to use auto dram configuration

[Hans de Goede]

Hi,

On 18-01-15 17:24, Ian Campbell wrote:
> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
>> Currently we've separate detailed dram settings for all sun4i boards, this
>> moves them
>
> There's only one board here, did you intend for the next patch to be
> folder with this one as a bulk switch? Or is there something
> particularly interesting about this one?

The only thing special about this board is that it is the only currently
supported sun4i board which I do not have :)

I'm waiting for Zoltan to get back to me with testing results and then I
can add his Tested-by, I can squash it into the next patch and add his
Tested-by there, I guess that makes more sense.

Regards,

Hans


>
>>   over to using auto dram configuration so that we can get rid of
>> all the per board dram_foo.c files.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   board/sunxi/Makefile                   |  2 +-
>>   board/sunxi/dram_sun4i_408_1024_iow8.c | 31 -------------------------------
>>   configs/Linksprite_pcDuino_defconfig   |  3 +++
>>   3 files changed, 4 insertions(+), 32 deletions(-)
>>   delete mode 100644 board/sunxi/dram_sun4i_408_1024_iow8.c
>>
>> diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
>> index 606bf73..0111b56 100644
>> --- a/board/sunxi/Makefile
>> +++ b/board/sunxi/Makefile
>> @@ -32,7 +32,7 @@ obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_auto.o
>>   obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
>>   obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_auto.o
>>   obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
>> -obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
>> +obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_auto.o
>>   obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
>>   obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
>>   obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
>> diff --git a/board/sunxi/dram_sun4i_408_1024_iow8.c b/board/sunxi/dram_sun4i_408_1024_iow8.c
>> deleted file mode 100644
>> index c6d87d2..0000000
>> --- a/board/sunxi/dram_sun4i_408_1024_iow8.c
>> +++ /dev/null
>> @@ -1,31 +0,0 @@
>> -/* this file is generated, don't edit it yourself */
>> -
>> -#include <common.h>
>> -#include <asm/arch/dram.h>
>> -
>> -static struct dram_para dram_para = {
>> -	.clock = 408,
>> -	.type = 3,
>> -	.rank_num = 1,
>> -	.density = 2048,
>> -	.io_width = 8,
>> -	.bus_width = 32,
>> -	.cas = 6,
>> -	.zq = 123,
>> -	.odt_en = 0,
>> -	.size = 1024,
>> -	.tpr0 = 0x30926692,
>> -	.tpr1 = 0x1090,
>> -	.tpr2 = 0x1a0c8,
>> -	.tpr3 = 0,
>> -	.tpr4 = 0,
>> -	.tpr5 = 0,
>> -	.emr1 = 0,
>> -	.emr2 = 0,
>> -	.emr3 = 0,
>> -};
>> -
>> -unsigned long sunxi_dram_init(void)
>> -{
>> -	return dramc_init(&dram_para);
>> -}
>> diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
>> index f5b0ca9..0bf329e 100644
>> --- a/configs/Linksprite_pcDuino_defconfig
>> +++ b/configs/Linksprite_pcDuino_defconfig
>> @@ -5,3 +5,6 @@ CONFIG_FDTFILE="sun4i-a10-pcduino.dtb"
>>   +S:CONFIG_ARCH_SUNXI=y
>>   +S:CONFIG_MACH_SUN4I=y
>>   +S:CONFIG_TARGET_PCDUINO=y
>> ++S:CONFIG_DRAM_CLK=408
>> ++S:CONFIG_DRAM_ZQ=123
>> ++S:CONFIG_DRAM_EMR1=0
>
>

[U-Boot] [PATCH 5/9] sunxi: Convert sun4i boards to use auto dram configuration

[Hans de Goede]

Currently we've separate detailed dram settings for all sun4i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

This been tested on a A10-OLinuXino-Lime, Chuwi_V7_CW0825 and
ba10_tv_box.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 board/sunxi/Makefile                    |  8 +-------
 board/sunxi/dram_a10_olinuxino_l.c      | 31 -------------------------------
 board/sunxi/dram_sun4i_384_1024_iow8.c  | 31 -------------------------------
 board/sunxi/dram_sun4i_408_1024_iow16.c | 31 -------------------------------
 configs/A10-OLinuXino-Lime_defconfig    |  3 +++
 configs/Chuwi_V7_CW0825_defconfig       |  3 +++
 configs/ba10_tv_box_defconfig           |  3 +++
 7 files changed, 10 insertions(+), 100 deletions(-)
 delete mode 100644 board/sunxi/dram_a10_olinuxino_l.c
 delete mode 100644 board/sunxi/dram_sun4i_384_1024_iow8.c
 delete mode 100644 board/sunxi/dram_sun4i_408_1024_iow16.c

diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 0111b56..f838e7b 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -11,7 +11,7 @@
 obj-y	+= board.o
 obj-$(CONFIG_SUNXI_GMAC)	+= gmac.o
 obj-$(CONFIG_SUNXI_AHCI)	+= ahci.o
-obj-$(CONFIG_TARGET_A10_OLINUXINO_L)	+= dram_a10_olinuxino_l.o
+obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
 obj-$(CONFIG_TARGET_A13_OLINUXINO)	+= dram_a13_olinuxino.o
 obj-$(CONFIG_TARGET_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
@@ -20,19 +20,13 @@ obj-$(CONFIG_TARGET_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
 obj-$(CONFIG_TARGET_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
 # This is not a typo, uses the same mem settings as the a10s-olinuxino-m
 obj-$(CONFIG_TARGET_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
 obj-$(CONFIG_TARGET_BANANAPI)		+= dram_bananapi.o
 obj-$(CONFIG_TARGET_BANANAPRO)		+= dram_bananapi.o
-obj-$(CONFIG_TARGET_CHUWI_V7_CW0825)	+= dram_sun4i_408_1024_iow16.o
-obj-$(CONFIG_TARGET_CUBIEBOARD)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_CUBIEBOARD2)	+= dram_cubieboard2.o
 obj-$(CONFIG_TARGET_CUBIETRUCK)		+= dram_cubietruck.o
 obj-$(CONFIG_TARGET_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_auto.o
 obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
 obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
 obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
diff --git a/board/sunxi/dram_a10_olinuxino_l.c b/board/sunxi/dram_a10_olinuxino_l.c
deleted file mode 100644
index 24a1bd9..0000000
--- a/board/sunxi/dram_a10_olinuxino_l.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_384_1024_iow8.c b/board/sunxi/dram_sun4i_384_1024_iow8.c
deleted file mode 100644
index b0fcc55..0000000
--- a/board/sunxi/dram_sun4i_384_1024_iow8.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_408_1024_iow16.c b/board/sunxi/dram_sun4i_408_1024_iow16.c
deleted file mode 100644
index 1bc9f73..0000000
--- a/board/sunxi/dram_sun4i_408_1024_iow16.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index f0cbf21..ac7adc8 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -5,3 +5,6 @@ CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb"
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_A10_OLINUXINO_L=y
++S:CONFIG_DRAM_CLK=480
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 26cac90..9617907 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -12,3 +12,6 @@ CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_CHUWI_V7_CW0825=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 37bf51b..0bfb5bd 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -6,3 +6,6 @@ CONFIG_USB2_VBUS_PIN="PH12"
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
 +S:CONFIG_TARGET_BA10_TV_BOX=y
++S:CONFIG_DRAM_CLK=384
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
-- 
2.1.0

[U-Boot] [PATCH 5/9] sunxi: Convert sun4i boards to use auto dram configuration

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> Currently we've separate detailed dram settings for all sun4i boards, this
> moves them over to using auto dram configuration so that we can get rid of
> all the per board dram_foo.c files.
> 
> This been tested on a A10-OLinuXino-Lime, Chuwi_V7_CW0825 and
> ba10_tv_box.

Unless I'm mistaken that's one for each of the dram_*.c removed, good.

> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Ian Campbell <ijc@hellion.org.uk>

[U-Boot] [PATCH 6/9] sunxi: Remove CONFIG_TARGET_FOO for sun4i, sun6i and sun8i boards

[Hans de Goede]

CONFIG_TARGET_FOO is only used in board/sunxi/Makefile to select the
dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some
special handling of the bananapi/bananapro (both sun7i), iow it is not used
at all on any sun4i, sun6i and sun8i boards so lets get rid of it there.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 board/sunxi/Kconfig                  | 57 ------------------------------------
 configs/A10-OLinuXino-Lime_defconfig |  1 -
 configs/CSQ_CS908_defconfig          |  1 -
 configs/Chuwi_V7_CW0825_defconfig    |  1 -
 configs/Colombus_defconfig           |  1 -
 configs/Cubieboard_defconfig         |  1 -
 configs/Hummingbird_A31_defconfig    |  1 -
 configs/Linksprite_pcDuino_defconfig |  1 -
 configs/MSI_Primo81_defconfig        | 10 ++++++-
 configs/Mele_A1000_defconfig         |  1 -
 configs/Mele_M9_defconfig            |  1 -
 configs/Mini-X_defconfig             |  1 -
 configs/ba10_tv_box_defconfig        |  1 -
 13 files changed, 9 insertions(+), 69 deletions(-)

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index f7064d0..b9c25cc 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -75,10 +75,6 @@ config SYS_CONFIG_NAME
 choice
 	prompt "Board"
 
-config TARGET_A10_OLINUXINO_L
-	bool "A10_OLINUXINO_L"
-	depends on MACH_SUN4I
-
 config TARGET_A10S_OLINUXINO_M
 	bool "A10S_OLINUXINO_M"
 	depends on MACH_SUN5I
@@ -115,58 +111,22 @@ config TARGET_BANANAPRO
 	bool "BANANAPRO"
 	depends on MACH_SUN7I
 
-config TARGET_CHUWI_V7_CW0825
-	bool "CHUWI_V7_CW0825"
-	depends on MACH_SUN4I
-
-config TARGET_COLOMBUS
-	bool "COLOMBUS"
-	depends on MACH_SUN6I
-
 config TARGET_CUBIEBOARD2
 	bool "CUBIEBOARD2"
 	depends on MACH_SUN7I
 
-config TARGET_CUBIEBOARD
-	bool "CUBIEBOARD"
-	depends on MACH_SUN4I
-
 config TARGET_CUBIETRUCK
 	bool "CUBIETRUCK"
 	depends on MACH_SUN7I
 
-config TARGET_HUMMINGBIRD_A31
-	bool "HUMMINGBIRD_A31"
-	depends on MACH_SUN6I
-
-config TARGET_IPPO_Q8H_V5
-	bool "IPPO_Q8H_V5"
-	depends on MACH_SUN8I
-
-config TARGET_PCDUINO
-	bool "PCDUINO"
-	depends on MACH_SUN4I
-
 config TARGET_PCDUINO3
 	bool "PCDUINO3"
 	depends on MACH_SUN7I
 
-config TARGET_MELE_A1000
-	bool "MELE_A1000"
-	depends on MACH_SUN4I
-
 config TARGET_MELE_M3
 	bool "MELE_M3"
 	depends on MACH_SUN7I
 
-config TARGET_MELE_M9
-	bool "MELE_M9"
-	depends on MACH_SUN6I
-
-config TARGET_MINI_X
-	bool "MINI_X"
-	depends on MACH_SUN4I
-
 config TARGET_MSI_PRIMO73
 	bool "MSI Primo73 (7\" tablet)"
 	depends on MACH_SUN7I
@@ -180,23 +140,6 @@ config TARGET_MSI_PRIMO73
 	OTG and 3.5mm headphone jack. More details are available at
 	    http://linux-sunxi.org/MSI_Primo73
 
-config TARGET_MSI_PRIMO81
-	bool "MSI Primo81 (7.85\" tablet)"
-	depends on MACH_SUN6I
-	---help---
-	The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
-	1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
-	rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
-	and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
-	(both volume buttons are also connected to the UBOOT_SEL pin). The
-	external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
-	OTG and 3.5mm headphone jack. More details are available at
-	    http://linux-sunxi.org/MSI_Primo81
-
-config TARGET_BA10_TV_BOX
-	bool "BA10_TV_BOX"
-	depends on MACH_SUN4I
-
 config TARGET_I12_TVBOX
 	bool "I12_TVBOX"
 	depends on MACH_SUN7I
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index ac7adc8..8fa1a33 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_A10_OLINUXINO_L=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index 1b6cdbf..4040bee 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun6i-a31s-cs908.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_CSQ_CS908=y
 +S:CONFIG_DRAM_CLK=432
 +S:CONFIG_DRAM_ZQ=123
 # Ethernet phy power
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 9617907..3141024 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -11,7 +11,6 @@ CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_CHUWI_V7_CW0825=y
 +S:CONFIG_DRAM_CLK=408
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index f42ae52..33edcc4 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun6i-a31-colombus.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_COLOMBUS=y
 +S:CONFIG_DRAM_CLK=240
 +S:CONFIG_DRAM_ZQ=251
 # Wifi power
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index b256b95..4efc6e1 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_CUBIEBOARD=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=0
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index 8896999..0275463 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -6,7 +6,6 @@ CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_HUMMINGBIRD_A31=y
 +S:CONFIG_DRAM_CLK=312
 +S:CONFIG_DRAM_ZQ=251
 # Wifi power
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index 0bf329e..1ba37bb 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun4i-a10-pcduino.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_PCDUINO=y
 +S:CONFIG_DRAM_CLK=408
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=0
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index b4b0f6d..140f864 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -1,3 +1,12 @@
+# The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
+# 1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
+# rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
+# and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
+# (both volume buttons are also connected to the UBOOT_SEL pin). The
+# external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
+# OTG and 3.5mm headphone jack. More details are available at
+#     http://linux-sunxi.org/MSI_Primo81
+
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS=""
 CONFIG_FDTFILE="sun6i-a31s-primo81.dtb"
@@ -5,7 +14,6 @@ CONFIG_USB_KEYBOARD=n
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_MSI_PRIMO81=y
 +S:CONFIG_DRAM_CLK=360
 +S:CONFIG_DRAM_ZQ=122
 # Wifi power
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 3b4a19e..1a0a025 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -5,7 +5,6 @@ CONFIG_VIDEO_VGA=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_MELE_A1000=y
 +S:CONFIG_DRAM_CLK=360
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=0
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index e5ab0ec..eaf9a7e 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun6i-a31-m9.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_MELE_M9=y
 +S:CONFIG_DRAM_CLK=312
 +S:CONFIG_DRAM_ZQ=120
 # The Mele M9 uses 3.3V for general IO
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index bb39464..6aea777 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_MINI_X=y
 +S:CONFIG_DRAM_CLK=360
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=0
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 0bfb5bd..400906d 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -5,7 +5,6 @@ CONFIG_USB2_VBUS_PIN="PH12"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
-+S:CONFIG_TARGET_BA10_TV_BOX=y
 +S:CONFIG_DRAM_CLK=384
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=4
-- 
2.1.0

[U-Boot] [PATCH 6/9] sunxi: Remove CONFIG_TARGET_FOO for sun4i, sun6i and sun8i boards

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> CONFIG_TARGET_FOO is only used in board/sunxi/Makefile to select the
> dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some
> special handling of the bananapi/bananapro (both sun7i), iow it is not used
> at all on any sun4i, sun6i and sun8i boards so lets get rid of it there.

How close are we to being able to do the same for sun5i and/or sun7i?

The banana* stuff probably ought to become CONFIG_SUNXI_GMAX_DELAY (or
whatever it was, you've told me like three times now but I can't seem to
retain it...) sooner rather than later.

Ian.

[U-Boot] [PATCH 6/9] sunxi: Remove CONFIG_TARGET_FOO for sun4i, sun6i and sun8i boards

[Ian Campbell]

On Sun, 2015-01-18 at 16:31 +0000, Ian Campbell wrote:
> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> > CONFIG_TARGET_FOO is only used in board/sunxi/Makefile to select the
> > dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some
> > special handling of the bananapi/bananapro (both sun7i), iow it is not used
> > at all on any sun4i, sun6i and sun8i boards so lets get rid of it there.
> 
> How close are we to being able to do the same for sun5i and/or sun7i?
> 
> The banana* stuff probably ought to become CONFIG_SUNXI_GMAX_DELAY (or
> whatever it was, you've told me like three times now but I can't seem to
> retain it...) sooner rather than later.

Oh, forgot the most important bit ;-)

Acked-by: Ian Campbell <ijc@hellion.org.uk>

Ian.

[U-Boot] [PATCH 6/9] sunxi: Remove CONFIG_TARGET_FOO for sun4i, sun6i and sun8i boards

[Hans de Goede]

Hi,

On 18-01-15 17:31, Ian Campbell wrote:
> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
>> CONFIG_TARGET_FOO is only used in board/sunxi/Makefile to select the
>> dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some
>> special handling of the bananapi/bananapro (both sun7i), iow it is not used
>> at all on any sun4i, sun6i and sun8i boards so lets get rid of it there.
>
> How close are we to being able to do the same for sun5i and/or sun7i?

For sun5i it is a matter of me sitting down, doing the work, then testing on
all the boards, then submit to the list for review.

For sun7i it is more or less the same, except that I do not own 1 or 2
supported sun7i boards, but I guess it is safe to say that if autoconfig
works for all the boards I do own that it will work on the one I do not
own also, never the less when I get around to this I'll also ask the MAINTAINERS
to test.

> The banana* stuff probably ought to become CONFIG_SUNXI_GMAX_DELAY (or
> whatever it was, you've told me like three times now but I can't seem to
> retain it...) sooner rather than later.

Ack, this is all a matter of spending the time to make the necessary changes.

I did the sun4i work now, because I wanted to clean up the sun4i stuff before
adding more sun4i boards.

Regards,

Hans

[U-Boot] [PATCH 7/9] sunxi: Add mk802 board / defconfig

[Hans de Goede]

The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features
512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle,
mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not
use the AXP209 pmic, it does not have a pmic at all.

For more details see: http://linux-sunxi.org/Rikomagic_mk802

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 configs/mk802_defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 configs/mk802_defconfig

diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
new file mode 100644
index 0000000..d6b51a5
--- /dev/null
+++ b/configs/mk802_defconfig
@@ -0,0 +1,10 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
+CONFIG_FDTFILE="sun4i-a10-mk802.dtb"
+CONFIG_USB2_VBUS_PIN="PH12"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_DRAM_CLK=360
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
-- 
2.1.0

[U-Boot] [PATCH 7/9] sunxi: Add mk802 board / defconfig

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features
> 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle,
> mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not
> use the AXP209 pmic, it does not have a pmic at all.
> 
> For more details see: http://linux-sunxi.org/Rikomagic_mk802
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

For the three mk802* patches (#7..#9), iff you add MAINTAINERS entries,
then:
        Acked-by: Ian Campbell <ijc@hellion.org.uk>

Ian.

[U-Boot] [PATCH 7/9] sunxi: Add mk802 board / defconfig

[Hans de Goede]

Hi,

On 18-01-15 17:34, Ian Campbell wrote:
> On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
>> The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features
>> 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle,
>> mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not
>> use the AXP209 pmic, it does not have a pmic at all.
>>
>> For more details see: http://linux-sunxi.org/Rikomagic_mk802
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> For the three mk802* patches (#7..#9), iff you add MAINTAINERS entries,
> then:
>          Acked-by: Ian Campbell <ijc@hellion.org.uk>

Gah, will I ever learn :)

Thanks for all the reviews, I've just pushed this set + the patches
you acked from the A80 set (will do a v2 of the others later) +
Siarhei's display patches + the marsboard defconfig to u-boot-sunxi/next,
the plan is to rebase on top of origin/master as soon as Tom pulls
from u-boot-usb, add in the OTG enable patch and then send another
pull-req, as we've build up a nice set of patches again already.

Regards,

Hans

[U-Boot] [PATCH 8/9] sunxi: Add mk802ii board / defconfig

[Hans de Goede]

The mk802ii is a revised version of the mk802 A10 based hdmi tv-stick, it
features 1G RAM, 4G nand, a hdmi male connector, USB-A receptacle, 2 micro
usb receptacles (OTG & power) and USB-wifi, and does come with an axp209 pmic.

For more details see: http://linux-sunxi.org/Rikomagic_mk802ii

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 configs/mk802ii_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)
 create mode 100644 configs/mk802ii_defconfig

diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
new file mode 100644
index 0000000..500f4df
--- /dev/null
+++ b/configs/mk802ii_defconfig
@@ -0,0 +1,9 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_FDTFILE="sun4i-a10-mk802ii.dtb"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_DRAM_CLK=360
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
-- 
2.1.0

[U-Boot] [PATCH 9/9] sunxi: Add mk802_a10s board / defconfig

[Hans de Goede]

The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has
an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand,
a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG)
and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic,
the axp152.

For more details see: http://linux-sunxi.org/Semitime_g2

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 board/sunxi/Kconfig           |  4 ++++
 board/sunxi/Makefile          |  1 +
 board/sunxi/dram_sun5i_auto.c | 31 +++++++++++++++++++++++++++++++
 configs/mk802_a10s_defconfig  | 11 +++++++++++
 4 files changed, 47 insertions(+)
 create mode 100644 board/sunxi/dram_sun5i_auto.c
 create mode 100644 configs/mk802_a10s_defconfig

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index b9c25cc..c5ce099 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -127,6 +127,10 @@ config TARGET_MELE_M3
 	bool "MELE_M3"
 	depends on MACH_SUN7I
 
+config TARGET_MK802_A10S
+	bool "MK802_A10S"
+	depends on MACH_SUN5I
+
 config TARGET_MSI_PRIMO73
 	bool "MSI Primo73 (7\" tablet)"
 	depends on MACH_SUN7I
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index f838e7b..feb439a 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_TARGET_CUBIEBOARD2)	+= dram_cubieboard2.o
 obj-$(CONFIG_TARGET_CUBIETRUCK)		+= dram_cubietruck.o
 obj-$(CONFIG_TARGET_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
 obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MK802_A10S)		+= dram_sun5i_auto.o
 obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
 obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
 obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
new file mode 100644
index 0000000..a5965db
--- /dev/null
+++ b/board/sunxi/dram_sun5i_auto.c
@@ -0,0 +1,31 @@
+/* this file is generated, don't edit it yourself */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+	.clock = CONFIG_DRAM_CLK,
+	.type = 3,
+	.rank_num = 1,
+	.density = 0,
+	.io_width = 0,
+	.bus_width = 0,
+	.cas = 9,
+	.zq = CONFIG_DRAM_ZQ,
+	.odt_en = 0,
+	.size = 0,
+	.tpr0 = 0x42d899b7,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.tpr3 = 0,
+	.tpr4 = 0,
+	.tpr5 = 0,
+	.emr1 = CONFIG_DRAM_EMR1,
+	.emr2 = 0x10,
+	.emr3 = 0,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+	return dramc_init(&dram_para);
+}
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
new file mode 100644
index 0000000..086e1e4
--- /dev/null
+++ b/configs/mk802_a10s_defconfig
@@ -0,0 +1,11 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_FDTFILE="sun5i-a10s-mk802.dtb"
+CONFIG_USB1_VBUS_PIN="PB10"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_MK802_A10S=y
++S:CONFIG_DRAM_CLK=432
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
-- 
2.1.0

[U-Boot] [PATCH 1/9] sunxi: axp209: Disable interrupts when intializing the axp209

[Ian Campbell]

On Sun, 2015-01-18 at 13:23 +0100, Hans de Goede wrote:
> We do not use the axp209 interrupt, and at least in my mini-x (which does not
> have a power button) the pwr-button pin and the irq pin are soldered together,
> so if the axp209 keeps it irq asserted to long it will see a 10s pwr-button
> press and hard power off the board, disabling the irqs fixes this.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Ian Campbell <ijc@hellion.org.uk>